Produkte - Startseite
Lautsprecher
Deckenlautsprecher
Flat Field-Deckenlautsprecher Hängelautsprecher Lautsprecherboxen Montageoptionen für Lautsprecher Subwoofer
CS 26T Plus
CS 120P CS 1226T Plus CS 123T CS 26T Plus CS 3T SF 10C SUB SF 26CT SF 26CT LP SF 26X SF 3C LP SF 3CT LP SF 8CT SUB SGK SF26C SGK SF3C

Drucken

Pro

CS 26T Plus

Offener Zwei-Wege-Deckenlautsprecher mit 70/100 V-Transformator

Hauptmerkmale

Offener Lautsprecher, unendliche Schallwand („Infinite Baffle“)
165 mm-Tieftöner mit großem Hub
Ferrofluidgekühlter 19 mm-Kalottenhochtöner ist auf einer innovativen, wabenförmigen Hochtöner-Brücke montiert
8 Ω-Direkt- oder 70/100 V-Betrieb mit einem sechsstufigen Wahlschalter hinter der Abdeckung
Frequenzbereich 42 Hz bis 20 kHz, -10 dB, halber Raum
60 W rosa Rauschen
120 W Musikleistung
Alle Merkmale

Previous Next

Bildergalerie

AutoDesk Revit

Auswahlhilfe Lautsprecher

Lautsprecher-Kalkulator

Ausschreibungstexte

Fallstudien

In Paaren verkaufte Lautsprecher

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der CS 26T Plus von Extron ist ein offener Zwei-Wege-Deckenlautsprecher mit einem koaxialen Zwei-Treiber-Design und Transformator. Er liefert eine hochwertige Sprach- und Breitband-Audiowiedergabe mit einem 165 mm-Tieftöner mit großem Hub und ferrofluidgekühltem 19 mm-Kalottenhochtöner. Eine innovative Hochtöner-Brücke liefert ein ausgeglichenes seitliches Abstrahlverhalten und eine breite konische Abstrahlung von 112°für einen flexiblen Lautsprecherabstand. Mit einem Frequenzbereich von 42 Hz bis 20 kHz ist der CS 26 T Plus optimiert für eine Vielzahl von Anwendungen für Durchsagen und Audiopräsentationen mit Musik, Programm- und Sprachaudio. Durch den außergewöhnlich tiefreichenden Frequenzgang des Tieftöners mit großem Hub wird außerdem eine bessere Musikwiedergabe ermöglicht. Er hat eine Nennleistung von 60 W rosa Rauschen und 120 W Musikleistung.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

CS 26T Plus

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

CS 26T Plus

Provide a two-way open back ceiling speaker that shall provide an internal transformer.
1. Two-way open back ceiling speaker with internal transformer for 8 ohm direct and 70/100 volt operation
  1. Driver Requirements
    1. Shall consist of a 6.5" (16.5 cm) long-throw, polypropylene cone woofer
    2. Shall consist of a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter that is mounted on a honeycomb tweeter bridge
  2. Performance Requirements
    1. Shall provide a frequency range of 42 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a frequency response of 58 Hz to 16 kHz, ±3 dB, measured in full space
    3. Shall provide a power handling capacity of 60 watts (rms) continuous pink noise per IEC 60268-5 and 120 watts (rms) continuous program
    4. Shall provide a nominal sensitivity of 86 dB SPL (1 W, 1 m) measured in half space
    5. Shall provide a nominal impedance of 8 ohms per speaker
    6. Shall provide a nominal conical coverage angle of 112°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a six-position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 32, 16, 8, 4, and 2 watts, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 32, 16, 8, and 4 watts, and 8 ohms direct
    3. Shall provide speaker tap selector and selection guide on the front of the speaker
    4. Shall provide an internal overload protection circuit
    5. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of woofer magnet
    5. Shall weigh 5.7 lbs (2.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. General Requirements
    1. Shall be sold in pairs
    2. Shall be compatible with Extron CS 120P plenum rated enclosure
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 for heat and smoke release, only when speaker cartridge is used with CS 120P plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements for RoHS and WEEE
    4. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 26T Plus, part number 60-1505-03; no alternates or equals.

CS 26T Plus

Provide a two-way open back ceiling speaker that shall provide an internal transformer.
1. Two-way open back ceiling speaker with internal transformer for 8 ohm direct and 70/100 volt operation
  1. Driver Requirements
    1. Shall consist of a 6.5" (16.5 cm) long-throw, polypropylene cone woofer
    2. Shall consist of a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter that is mounted on a honeycomb tweeter bridge
  2. Performance Requirements
    1. Shall provide a frequency range of 42 Hz to 20 kHz, -10 dB below average SPL, measured on-axis in half space
    2. Shall provide a frequency response of 58 Hz to 16 kHz, ±3 dB, measured in full space
    3. Shall provide a power handling capacity of 60 watts (rms) continuous pink noise per IEC 60268-5 and 120 watts (rms) continuous program
    4. Shall provide a nominal sensitivity of 86 dB SPL (1 W, 1 m) measured in half space
    5. Shall provide a nominal impedance of 8 ohms per speaker
    6. Shall provide a nominal conical coverage angle of 112°
  3. Electrical Requirements
    1. Shall support 8 ohm direct or 70/100 volt connection from power amplifiers
    2. Shall provide a six-position, through-the-grille power tap selector
      1. Shall provide selectable rotary switch taps for 70 volt operation, including 32, 16, 8, 4, and 2 watts, and 8 ohms direct
      2. Shall provide selectable rotary switch taps for 100 volt operation, including 32, 16, 8, and 4 watts, and 8 ohms direct
    3. Shall provide speaker tap selector and selection guide on the front of the speaker
    4. Shall provide an internal overload protection circuit
    5. Shall support one incoming and one outgoing speaker level signal on one 4-pole, 5 mm captive screw connector
      1. Shall support wiring multiple speakers using parallel or loop-through wiring
      2. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      3. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Speaker Cartridge Enclosure Requirements
    1. Shall have a white, paintable textured finish
    2. Shall provide a thin-edged bezel surrounding the grille
    3. Shall measure 10.3" (26.2 cm) in diameter from bezel edge to edge
    4. Shall measure 3" (7.6 cm) in height from mounting surface to top of woofer magnet
    5. Shall weigh 5.7 lbs (2.6 kg) per speaker cartridge
    6. Shall require 9.2" (23.4 cm) diameter opening in mounting surface for speaker cutout
    7. Shall provide a white, paintable magnetically-attached perforated steel grille with black scrim
  5. General Requirements
    1. Shall be sold in pairs
    2. Shall be compatible with Extron CS 120P plenum rated enclosure
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, NFPA 70, and NFPA 90A
      2. Shall be UL listed for plenum airspaces and meet UL 2043 for heat and smoke release, only when speaker cartridge is used with CS 120P plenum ceiling tile enclosure
      3. Shall meet UL 1480 for commercial and professional audio systems
      4. Shall comply with appropriate requirements for RoHS and WEEE
    4. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron CS 26T Plus, part number 60-1505-03; no alternates or equals.

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

CS 26T Plus -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.