Produkte - Startseite
HDMI
HDMI-Extender
HDMI-Verteilverstärker HDMI-Umschalter HDMI-Kreuzschienen HDMI-Skalierer & -Signalprozessoren HDMI AV-Anschlussmodule HDMI-Kabel & -Adapter EDID-Management
FOX3 T 311 PC
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T DWP 4K 232 D DTP T DWP 4K 332 D DTP T EU 232 DTP T EU 4K 231 DTP T EU 4K 331 DTP T FB 232 DTP T FB 332 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T MK 4K 231 DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 201 D DTP2 T 202 FB DTP2 T 203 DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 T 202 eLink 100 FOX II T HD 4K FOX T USW 103 FOX T USW 203 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HC 402 HC 402 EU HC 402 MK HC 403 HC 404 HD 4K 101 Plus HD Pro Plenum-Serie HFX 100 PowerCage 1600 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI PowerCage FOX SR HDMI PowerCage FOX Tx HDMI

Drucken

Neu Pro

FOX3 T 311 PC

PowerCage-Glasfasersender für HDMI, USB HID, Audio und Steuerung

Hauptmerkmale

Überträgt HDMI-Video, USB-HID, Stereo-Audio- und RS-232-Steuerungssignale über sehr lange Glasfaserstrecken
Unterstützt mathematisch verlustfreies 4K-Video bis zu 4096x2160 bei 60 Hz mit einer 4:4:4-Farbabtastung über ein Glasfaserkabel
Unterstützt unkomprimiertes 4K-Video bis zu 4096x2160 bei 60 Hz mit einer 4:4:4-Farbabtastung über zwei Glasfasern
Unterstützt HDMI 2.0-Spezifikationen einschließlich Datenraten bis zu 18 Gbps, Deep Color bis zu 12 Bit und 3D
HDCP 2.3-konform
Im laufenden Betrieb austauschbares Modul für das PowerCage 411-Gehäuse (Teilenummer 60-1492-02)
Alle Merkmale

PowerCage 411 Populated with FOX3 T 311 PC Boards

Previous Next

Bildergalerie

Interaktive Übersicht

Empfohlene Videos

Funktionen vergleichen

Eine LinkLicense aktivieren

Ausschreibungstexte

Rechner für 8K-Datenraten

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der FOX3 T 311 PC-Glasfaser-Sender von Extron ist ein kompaktes Modul für einen Einschub des PowerCage 411-Gehäuses zur Übertragung von HDMI-Video-, USB HID, Stereo-Audio- und Steuerungssignalen über lange Glasfaserstrecken. Er wurde für außergewöhnlich hochauflösende Bilder entwickelt und nutzt die komplett digitale Extron-Technologie für eine perfekte, pixelgenaue Übertragung von unkomprimierten 4K/60-Bildern mit 4:4:4 über zwei Glasfasern oder mathematisch verlustfreiem 4K/60-Video über eine Glasfaser. Die Filterung nach Geräteklassen am USB-HID-Anschluss reduziert die möglichen Gerätetypen auf HID. Speziell für AV- und KVM-Systeme entwickelt, bietet der Sender viele integrationsfreundliche Funktionen, wie z. B. Key Minder^®, EDID Minder^®, Audio-Embedding sowie Systemüberwachung in Echtzeit.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

FOX3 T 311 PC

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

70-1223-11 – FOX3 T 311 PC MM – Lossless 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
    4. Interconnection requirements
  3. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  4. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (70-1223-11); no alternates or equals

70-1223-11 – FOX3 T 311 PC MM – Lossless 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
    4. Interconnection requirements
  3. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  4. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 MM (70-1223-11); no alternates or equals

70-1223-12 – FOX3 T 311 PC SM – Lossless 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
    4. Interconnection requirements
  3. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  4. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (70-1223-12); no alternates or equals

70-1223-12 – FOX3 T 311 PC SM – Lossless 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
    4. Interconnection requirements
  3. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  4. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
9. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
10. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
11. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
12. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
13. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 T 311 SM (70-1223-12); no alternates or equals

70-1223-13 – FOX3 T 311 PC MM – Uncompressed 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
12. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
13. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
14. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
15. Approved device shall be the Extron FOX3 T 311 MM (70-1223-13); no alternates or equals

70-1223-13 – FOX3 T 311 PC MM – Uncompressed 4K/60 Transmitter MM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over multimode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
12. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
13. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
14. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
15. Approved device shall be the Extron FOX3 T 311 MM (70-1223-13); no alternates or equals

70-1223-14 – FOX3 T 311 PC SM – Uncompressed 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
12. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
13. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
14. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
15. Approved device shall be the Extron FOX3 T 311 MM (70-1223-13); no alternates or equals

70-1223-14 – FOX3 T 311 PC SM – Uncompressed 4K/60 Transmitter SM

Shall provide a modular fiber optic transmitter that support the distribution of HDMI video, stereo audio, USB HID, and RS-232 control
1. Single-slot module designed for the Extron PowerCage 411 enclosure
2. Long distance signal extension of digital video with embedded stereo audio, control signals over singlemode fiber optic cabling
3. Video input requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall provide one (1) female HDMI Type A connector with buffered loop-through
  3. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
4. Embedded audio input requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
5. Analog Audio input requirements
  1. Shall provide one (1) 3.5 mm stereo mini jack for unbalanced analog stereo
  2. Shall support embedding of analog stereo audio onto HDMI signals
6. EDID communication requirements
  1. Shall include Extron EDID Minder® technology to automatically manage EDID communication between connected devices
7. USB HID input requirements
  1. Shall provide one (1) USB Type B connector for host devices
  2. Shall support host connection for USB HID
  3. Shall support device class filtering to limit device types to USB HID
  4. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
  5. Shall support data transfer rates up to 480 Mbps
8. AV device control requirements
  1. Shall provide one (1) bidirectional RS-232 connector for control pass-through
  2. Shall support three modes of RS-232 insertion or pass-through for controlling local or remote devices
    1. RS-232 pass-through from the local RS-232 port on the module onto the fiber for communicating with a remote device or control system
    2. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure to the local RS-232 port on the module for communicating with a local device
    3. RS-232 insertion from the Ethernet port on the PowerCage 411 enclosure onto the fiber for communicating a remote device
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, and control signals over singlemode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support user-selectable HDCP authorization to allow the transmitter to appear HDCP compliant or non‑HDCP compliant to the connected source
12. Setup, control, and configuration requirements
  1. Shall support module setup, configuration, and control via the PowerCage 411 enclosure
    1. Setup, configuration, and firmware updates via the mini USB port on the enclosure front panel
    2. Setup, configuration, and control via the bidirectional RS-232 port on the enclosure rear panel
    3. Setup, configuration, control, and monitoring via an Ethernet connection to the RJ-45 port on the enclosure rear panel
    4. Setup and configuration without a computer using the front-panel controls and LCD on the enclosure
  2. Shall support Extron Product Configuration Software – PCS for setup and configuration
13. Power requirements
  1. Shall be supplied power by a PowerCage 411 enclosure
14. General requirements
  1. Shall provide internal color bars test pattern for calibration and setup
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status
  3. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  4. Shall provide at least (3) three years parts and labor warranty
  5. Shall be compatible with Extron FOX3 Series fiber optic receivers
  6. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
15. Approved device shall be the Extron FOX3 T 311 MM (70-1223-13); no alternates or equals

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

FOX3 T 311 PC -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.