| MPA 601-70V and 100V |
|
| Audio |
|---|
| Voltage gain | |
| MPA 601-70V | |
| RCA and TRS inputs | 222x (47 dB) |
| Captive screw input | 57x (35 dB) |
| MPA 601-100V | |
| RCA and TRS inputs | 317x (50 dB) |
| Captive screw input | 81x (38 dB) |
| CMRR | 75 dB (typical) @ 1kHz |
| Bass adjustment | ±10 dB @ 100 Hz |
| Treble adjustment | ±10 dB @ 10 kHz |
|
| Audio input |
|---|
| Number/signal type | 1 stereo/mono, balanced/unbalanced input
2 stereo/mono, unbalanced inputs
(The three inputs are individually buffered and mixed together. Stereo signals are actively summed into a mono signal.) |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole (main input)
(1) 3.5 mm mini audio jack (tip, ring, sleeve)
1 pair of RCA |
| Impedance | |
| RCA and TRS inputs | >10k ohms unbalanced, DC coupled |
| Captive screw input | >10k ohms unbalanced, 20k ohms balanced, DC coupled |
| Maximum level | |
| RCA and TRS inputs | +5 dBV, unbalanced, at 1% THD+N |
| Captive screw input | +20 dBu, balanced, at 1% THD+N |
| Input sensitivity | |
| RCA and TRS inputs | -10 dBV if driven by one input
-16 dBV if both inputs are summed |
| Captive screw input | +4 dBu if driven by one input
-2 dBu if both inputs are summed |
| Input signal detection threshold | |
| RCA and TRS inputs | -68 dBV ±3 dB, unbalanced if driven by one input
-74 dBV ±3 dB, unbalanced if both inputs are summed |
| Captive screw input | -55 dBu ±3 dB, balanced if driven by one input
-61 dBu ±3 dB, unbalanced if both inputs are summed |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV = 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | |
| MPA 601-70V | 1 single channel (mono) 70V |
| MPA 601-100V | 1 single channel (mono) 100V |
| Connector | (1) 5 mm screw lock captive screw connector, 2 pole |
| Load impedance | |
| MPA 601-70V | 83 ohms minimum |
| MPA 601-100V | 166 ohms minimum |
| Frequency response | 80 Hz to 20 kHz, +1 dB/-3 dB, 1 watt |
| THD + Noise | < 0.1% @ 1 kHz, 3 dB below clipping |
| S/N | > 90 dB, 20 Hz to 20 kHz, unweighted |
| Damping factor | > 100 |
| High pass filter | 80 Hz, 12 dB/octave roll off |
| Amplifier type | Class D |
| Output power | |
| MPA 601-70V | 60 watts (rms), 70V, 1 kHz, < 1% THD |
| MPA 601-100V | 60 watts (rms), 100V, 1 kHz, < 1% THD |
|
| Control/remote — amplifier |
|---|
| Control port | (2) 3.5 mm captive screw connectors, 3 pole |
| Pin configuration | |
| DC volume control (analog) | Pin 1 = +10 VDC (50 mA max), pin 2 = volume/mute control (variable voltage), pin 3 = GND |
| Volume control voltage range | 0V (mute) to 10V (maximum volume) |
| Standby power control | Pin 1 = timer off, pin 2 = standby, pin 3 = GND |
|
| General |
|---|
| Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 4.2 A, 50 watts |
| Power consumption and thermal dissipation | |
MPA 601-70V
| |
115 VAC, 60Hz |
230 VAC, 50Hz |
AC Line
Current |
AC Power
Consumed |
Thermal
Dissipation |
AC Line
Current |
AC Power
Consumed |
Thermal
Dissipation |
| Condition |
A |
W |
W |
BTU/hr |
A |
W |
W |
BTU/hr |
Active (1/8 power), all
channels driven |
70 V |
0.3 |
14.6 |
7.1 |
24 |
0.2 |
14.8 |
7.3 |
25 |
| Quiescent (idle) |
0.1 |
5.0 |
5.0 |
17 |
0.1 |
5.1 |
5.1 |
17 |
| Standby |
<0.1 |
<1 |
<1 |
<3 |
<0.1 |
<1 |
<1 |
<3 |
|
MPA 601-100V
| |
115 VAC, 60Hz |
230 VAC, 50Hz |
AC Line
Current |
AC Power
Consumed |
Thermal
Dissipation |
AC Line
Current |
AC Power
Consumed |
Thermal
Dissipation |
| Condition |
A |
W |
W |
BTU/hr |
A |
W |
W |
BTU/hr |
Active (1/8 power), all
channels driven |
100 V |
0.3 |
15.1 |
7.6 |
26 |
0.2 |
15.3 |
7.8 |
27 |
| Quiescent (idle) |
0.2 |
5.6 |
5.6 |
19 |
0.2 |
5.7 |
5.7 |
19 |
| Standby |
<0.1 |
<1 |
<1 |
<3 |
<0.1 |
<1 |
<1 |
<3 |
|
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf or back of rack mounting kit |
| Furniture mount | Yes, with optional under-desk mounting kit |
| Pole mount | Yes, with optional pole mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors) |
| Product weight | 0.9 lbs (0.4 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL/IEC 62368-1 for safety,
CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class B, ICES Class B, VCCI, KC Mark |
| Environmental | Complies with the appropriate requirements of CEC, Ecofficient Level 3, EU code of conduct, RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10% |
|
| NOTE | Specifications are subject to change without notice |
|
| (6427-D6) |