| MTP R 15HD RSA D |
|
| Video |
|---|
| Gain | Unity |
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 on a pigtail |
|
| Video input — See MTP Series Transmitter video output specifications |
|---|
|
| Video output |
|---|
| Number/signal type | 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video,
S-video, or composite video |
| Connectors | 1 female 15-pin HD |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.3 V to 1.45 Vp-p |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset | <±20 mV with input at 0 offset |
| Maximum resolution | 1920x1200 or 2048x1080 |
| NOTE | Refer to the user guide for the maximum distances recommended for specific resolutions. |
|
|
| Sync |
|---|
| Output type | RGBHV, RGBS, RGsB, RsGsBs |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level | 4.0 V to 5.0 Vp-p, unterminated |
| Output impedance | 110 ohms |
| Polarity | Positive or negative (switch selectable) |
|
| Audio |
|---|
| Number/signal type | 1 set of proprietary analog signals from an MTP transmitter |
| Connector | 1 female RJ-45 |
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±1 dB |
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >70 dB at maximum output (unweighted) |
| CMRR | >43 dB @ 20 Hz to 20 kHz |
|
| Audio output |
|---|
| Number/signal type | 1 mono, balanced/unbalanced |
| Connector | (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles) |
| Impedance | 50 ohms balanced, 100 ohms balanced |
| Gain error | ±1 dB channel to channel |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level | 14 dBm, unbalanced at 1% THD+N |
|
| Control/remote — external device (pass-through, unidirectional or bidirectional) |
|---|
| Serial control port input/output | 1 set of proprietary signals on a female RJ-45 jack |
| Serial control port output/input | RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole |
| NOTE | The serial communications link is unidirectional only, transmitter to receiver, unless the directional DIP switch of the receiver has been repositioned. The switch should be repositioned only when the receiver is the only one in the system. |
|
| Baud rates | Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) |
| Protocol | Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
| NOTE | Protocol is mirrored between the transmitter and the receiver. |
|
| Serial control pin configuration | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND |
|
| General |
|---|
| Recommended cable type | CAT5/5E/6 (shielded or unshielded) |
| Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| Power input requirements | 12 VDC, 0.5 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Furniture mount | Yes, using a standard electrical wall box or Decorator-Style size mud ring |
| Enclosure type | Metal |
| Enclosure dimensions |
| Faceplate | 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Height is 3.8" (9.7 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W Decorator-Style wallplate. Depth excludes connectors.) |
| Device | 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.) |
| Product weight | 0.4 lbs (0.2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (4007-041917) |