| SGS 408 Seamless Switcher |
|
| Video |
|---|
| Routing | 8 x 2 matrix |
| Gain | Variable, set by the contrast control |
|
| Video input |
|---|
| Number/signal type | 8 RGBHV, RGBS, RGsB, component video |
| Connectors | 8 x 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | 0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Input termination | High Z |
| Horizontal frequency | Autoscan 15 kHz to 100 kHz |
| Vertical frequency | Autoscan 50 Hz to 120 Hz |
| Resolution range | Autoscan 560 x 384 to 1600 x 1200 |
| DC offset (max. allowable) | 0.5 V |
|
| Video processing |
|---|
| Digital sampling | 24 bit, 8 bits per color; 140 MHz standard |
| Horizontal filtering | 8 levels |
| Vertical filtering | 8 levels |
| Frame rate delay | 0 to 1 field |
|
| Video output |
|---|
| Number/signal type | 2 (program and preview) RGBHV, RGBS |
| Connectors | Program output: 5 BNC female, (1) 15-pin HD female
Preview output: 5 BNC female, (1) 15-pin HD female, 1 DVI (optional) |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0 V to 0.7 Vp-p |
| Impedance | 75 ohms |
| Scaled resolutions | 640x4801,3,4,5, 800x6001,3,4,5, 832x6243,4,5, 848x4803,5, 852x4803,5, 1024x7681,3,4,5, 1280x7682,5,1280x10241,3,5, 1360x7653,5, 1365x10243,5, 1400x10501,3,5, 576p1,5, 720p3,5, 1080i1,3,5, and 1080p3,5
1 = at 50 Hz ; 2 = at 56 Hz; 3 = at 60 Hz; 4 = at 75 Hz; 5 = locked to the current vertical refresh rate of input 1 (Accu-RATE Frame Lock) |
| NOTE | For 1365x1024, 1080p, and 1080i output resolutions, the optional DVI output's true horizontal resolution is limited to 1440 pixels (1228 pixels for 1365x1024). The 576p output resolution provides 1280x576 pixels on the DVI output card and may not be recognized on some displays. The DVI card outputs all other selected resolutions normally. |
|
| NOTE | For the output resolutions listed below, the total pixel and active pixel values of the RGBHV outputs are reduced as follows:
1365x1024: 1228 active pixels
1080i: 1440 active pixels
1080p: 1440 active pixels
The sync timings and the line widths are correct and most displays recognize the rate correctly. |
|
| DC offset | ±50 mV (max.) with input at 0 offset |
|
| Sync |
|---|
| Input type | Autodetect RGBHV, RGBS, RGsB |
| Output type | RGBHV, RGBS |
| Input level | 3.0 V to 5.0 Vp-p |
| Output level | TTL: 5.0 Vp-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.0 Vp-p |
| Output polarity | Composite sync: negative
H/V: user-selectable |
|
| Control/remote — switcher |
|---|
| Serial control port | RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 2 = Tx, 3 = Rx, 5 = GND |
| RCP port | 4-pin XLR |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50/60 Hz, 60 watts, internal, autoswitchable |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fans, right to left (as viewed from the front panel) |
| Mounting | |
| Rack mount | Yes, with attached mounting brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
13.3 cm H x 44.4 cm W x 28.4 cm D
(Depth excludes connectors. Width excludes rack ears.) |
| Product weight | 13.8 lbs (6.3 kg) |
| Shipping weight | 21 lbs (10 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-040110-D5) |