| SMX System MultiMatrix Switchers |
|
| Video — composite video (SMX 84/88/1616 V) |
|---|
| Routing | |
| SMX 84 V | 8 x 4 matrix |
| SMX 88 V | 8 x 8 matrix |
| SMX 1616 V | 16 x 16 matrix |
| Gain | Unity |
| Bandwidth | 150 MHz (-3 dB), fully loaded |
| Differential phase error | 1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error | 1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk | -60 dB @ 5 MHz |
| Switching speed | 100 ms (max.) |
|
| Video input — composite video (SMX 84/88/1616 V) |
|---|
| Number/signal type | 8 or 16 composite video, S/PDIF digital audio (not reclocked) |
| Connectors | 8 or 16 female BNC |
| Nominal level | 1 Vp-p for composite video |
| Minimum/maximum levels | Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset (max. allowable) | 1.0 V |
|
| Video output — composite video (SMX 84/88/1616 V) |
|---|
| Number/signal type | 4, 8, or 16 composite video, S/PDIF digital audio (not reclocked) |
| Connectors | 4, 8, or 16 female BNC |
| Nominal level | 1 Vp-p for composite video |
| Minimum/maximum levels | 0.1 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync — composite video (SMX 84/88/1616 V) |
|---|
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
|---|
| Routing | |
| SMX 84 SV/YC | 8 x 4 matrix |
| SMX 88 SV/YC | 8 x 8 matrix |
| SMX 1616 SV/YC | 16 x 16 matrix |
| Gain | Unity |
| Bandwidth | 150 MHz (-3 dB), fully loaded |
| Differential phase error | 1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error | 1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk | -60 dB @ 5 MHz |
| Switching speed | 100 ms (max.) |
|
| Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
|---|
| Number/signal type | 8 or 16 S-video, composite video |
| Connectors | |
| SMX 84/88/1616 SV | 8 or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC | 8 or 16 x 2 female BNC |
| Nominal level | 1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset (max. allowable) | 1.0 V |
|
| Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
|---|
| Number/signal type | 4, 8, or 16 S-video, composite video |
| Connectors | |
| SMX 84/88/1616 SV | 4, 8, or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC | 4, 8, or 16 x 2 female BNC |
| Nominal level | 1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.1 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
|---|
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Video — wideband (SMX 84/88/1616 WB) |
|---|
| Routing | |
| SMX 84 WB | 8 x 4 matrix |
| SMX 88 WB | 8 x 8 matrix |
| SMX 1616 WB | 16 x 16 matrix |
| Gain | Unity |
| Bandwidth | 400 MHz (-3 dB), fully loaded |
| Crosstalk |
| 8x8 | -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 | -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed | 200 ms (max.) |
|
| Video input — wideband (SMX 84/88/1616 WB) |
|---|
| Number/signal type | 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) |
| Connectors | 8 or 16 female BNC |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.0 V |
|
| Video output — wideband (SMX 84/88/1616 WB) |
|---|
| Number/signal type | 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked) |
| Connectors | 4, 8, or 16 female BNC |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
| Switching type | Triple-Action |
|
| Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC |
|---|
| Input type | |
| SMX 88 SYNC, SMX 1616 SYNC | Composite sync (S) |
| SMX 88 H+V | Separate H and V sync |
| Output type (follows input) | |
| SMX 88 SYNC, SMX 1616 SYNC | Composite sync (S) |
| SMX 88 H+V | Separate H and V sync |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Max. propagation delay | 35 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Video — VGA (SMX 84/88/1616 VGA) |
|---|
| Routing | |
| SMX 84 VGA | 8 x 4 matrix |
| SMX 88 VGA | 8 x 8 matrix |
| SMX 1616 VGA | 16 x 16 matrix |
| Gain | Unity |
| Bandwidth | 350 MHz (-3 dB), fully loaded |
| Crosstalk | |
| 8x8 | -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 | -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed | 200 ms (max.) |
|
| Video input — VGA (SMX 84/88/1616 VGA) |
|---|
| Number/signal type | 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | 8 or 16 female 15-pin HD |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-36 dB @ 5 MHz |
| DC offset (max. allowable) | 1.0 V |
|
| Video output — VGA (SMX 84/88/1616 VGA) |
|---|
| Number/signal type | 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | 4, 8, or 16 female 15-pin HD |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-36 dB @ 5 MHz |
| DC offset | ±6 mV with input at 0 offset |
| Switching type | Triple-Action |
|
| Sync — VGA (SMX 84/88/1616 VGA) |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Max. propagation delay | 40 ns |
| Max. rise/fall time | 18 ns |
| Polarity | Positive or negative (follows input) |
|
| Digital video — SMX 44/84/88/1616 SDI |
|---|
| Routing | |
| SMX 44 HD SDI | 4 x 4 matrix |
| SMX 84 HD SDI | 8 x 4 matrix |
| SMX 88 3G-SDI | 8 x 8 matrix |
| SMX 1616 3G-SDI | 16 x 16 matrix |
| Gain | Unity |
| Maximum data rate | 2.97 Gbps |
| Data types | 8 or 10 bit |
| Operation standards | |
| 4x4, 8x4 | SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120 |
| 8x8, 16x16 | SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120 |
|
| Digital video input — SMX 44/84/88/1616 SDI |
|---|
| Number/signal type | 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI |
| Connectors | 4, 8, or 16 female BNC |
| Nominal level | 0.80 Vp-p ± 10% |
| Impedance | 75 ohms |
| Return loss | <-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz |
| Equalization | Automatic |
| Input cable equalization distance |
| HD-SDI, 3G-SDI | |
| Extron SHR, Belden 1694A cable | 500' (152 m) |
| Extron HR, Belden 1505A cable | 400' (122 m) |
| SDI | |
| Extron SHR, Belden 1694A cable | 750' (229 m) |
| Extron HR, Belden 1505A cable | 550' (168 m) |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Digital video output — SMX 44/84/88/1616 SDI |
|---|
| Number/signal type | 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI |
| Connectors | 4, 8, or 16 female BNC |
| Nominal level | 0.80 Vp-p ± 10% |
| Impedance | 75 ohms |
| Return loss | <-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz |
| DC offset | ±0.5 V with input at 0 offset |
| Re-clocking | Automatic, or use available bypass mode for nonstandard rates |
| Jitter | <0.2 VI |
| Rise/fall time (20-80%) | |
| SDI | 700 ps ±100 ps |
| HD-SDI | 250 ps ±100 ps |
| 3G-SDI | 110 ps ± 30 ps |
|
| Video — SMX 44/48/84/88 DVI |
|---|
| NOTE | *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output. |
|
| Routing |
| SMX 44 DVI | 4 x 4 matrix |
| SMX 48 DVI | 4 x 8 matrix |
| SMX 84 DVI | 8 x 4 matrix |
| SMX 88 DVI | 8 x 8 matrix |
| Gain | Unity |
| Maximum data rate | 4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock | 165 MHz |
| Resolution range | Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz |
| Signal Type | Single-link DVI digital video signals are supported. |
| Digital video | RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE | These SMX DVI Series boards support TMDS data rates up to 4.95 Gbps and are not HDCP compliant. |
|
| NOTE | These SMX DVI Series boards are not compatible with HDMI 1.3. |
|
| Digital audio | Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content |
| Consumer Electronics Control (CEC) | Not supported |
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP | Not supported |
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. |
| Standards | DVI 1.0, HDMI 1.2 |
| Switching speed | 200 ns, max. |
|
| Video input — SMX 44/48/84/88 DVI |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*) |
| Connectors | 4 or 8 female DVI-I |
| Equalization | Automatic |
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — SMX 44/48/84/88 DVI |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*) |
| Connectors | 4 or 8 female DVI-I |
| Re-clocking | Automatic |
| Peripheral device power | 250 mA per output |
|
| Video — SMX 44/48/84/88 DVI PRO |
|---|
| NOTE | *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. |
|
| Routing | |
| SMX 44 DVI PRO | 4 x 4 matrix |
| SMX 48 DVI PRO | 4 x 8 matrix |
| SMX 84 DVI PRO | 8 x 4 matrix |
| SMX 88 DVI PRO | 8 x 8 matrix |
| Gain | Unity |
| Resolution range | Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz |
| Signal Type | Single-link DVI digital video signals are supported. |
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE | The SMX DVI PRO Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.
**Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.
|
|
| Digital audio | Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) | Not supported |
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards |
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) |
| Maximum pixel clock | 165 MHz |
| Standards | DVI 1.0, HDMI 1.3 |
| Switching speed | 200 ns, max. |
|
| Video input — SMX 44/48/84/88 DVI PRO |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*) |
| Connectors | 4 or 8 female DVI-I (digital only) |
| Equalization | Automatic |
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — SMX 44/48/84/88 DVI PRO |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*) |
| Connectors | 4 or 8 female DVI-I (digital only) |
| Re-clocking | Automatic |
| Peripheral device power | 250 mA per output |
|
| Video — SMX 44/48/84/88 HDMI |
|---|
| NOTE | *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
| Routing | |
| SMX 44 HDMI | 4 x 4 matrix |
| SMX 48 HDMI | 4 x 8 matrix |
| SMX 84 HDMI | 8 x 4 matrix |
| SMX 88 HDMI | 8 x 8 matrix |
| Gain | Unity |
| Resolution range | Up to 1920x1200 or 1080p @ 60 Hz |
| Signal Type | Single-link HDMI (or DVI-D*) |
| Digital video | RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE | The SMX HDMI Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.
**Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.
|
|
| Digital audio | Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) | Not supported |
| EDID and DDC | Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards |
| HPD | Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) |
| Maximum pixel clock | 165 MHz |
| Standards | DVI 1.0, HDMI 1.3 |
| Switching speed | 200 ns, max. |
|
| Video input — SMX 44/48/84/88 HDMI |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*) |
| Connectors | 4 or 8 female HDMI type A |
| Equalization | Automatic |
| Input cable length | >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color |
| NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
| Video output — SMX 44/48/84/88 HDMI |
|---|
| Number/signal type | 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*) |
| Connectors | 4 or 8 female HDMI type A |
| Re-clocking | Automatic |
| Peripheral device power | 250 mA per output |
|
| Optical specifications — SMX 88/1616 FOX Fiber Optic I/O board |
|---|
| NOTE | The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825. |
|
| Number/type | 8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board |
| NOTE | Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication. |
|
| Connectors | 16 or 32 LC connectors per I/O board |
| Operating distance | |
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit |
| Multimode | 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit |
| NOTE | Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) |
| Transmission power | |
| Singlemode | -5 dBm, typical |
| Multimode | -5 dBm, typical |
| Optical loss budget | |
| Singlemode | 12 dB, maximum |
| Multimode | 7 dB, maximum |
| Maximum channel data rate | 4.25 Gbps |
|
| Video — SMX 88/1616 FOX |
|---|
| Routing | 8 x 8 or 16 x 16 unidirectional (Tx) matrix or
4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix |
| Gain | Unity |
| Pixel data bit depth | 8 bits per channel, 3 channels (R, G, B) |
|
| Video/audio input — SMX 88/1616 FOX |
|---|
| Number/signal type | 8 or 16 fiber optic signals |
| Connectors | 8 or 16 LC connectors per I/O board |
| NOTE | Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier. |
|
|
| Video/audio output — SMX 88/1616 FOX |
|---|
| Number/signal type | 8 or 16 fiber optic signals |
| Connectors | 8 or 16 LC connectors per I/O board |
| NOTE | Output connects to an Extron fiber optic receiver. |
|
|
| USB — SMX 44/84 USB |
|---|
| USB specification | USB 2.0 compatible |
| USB data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) |
|
| USB input — SMX 44/84 USB |
|---|
| Connectors | 4 or 8 female USB type B |
|
| USB output — SMX 44/84 USB |
|---|
| Connectors | 8 female USB type A |
|
| Audio — SMX 84/88/1616A (analog) |
|---|
| Routing | |
| SMX 84 A | 8 x 4 stereo matrix |
| SMX 88 A | 8 x 8 stereo matrix |
| SMX 1616 A | 16 x 16 stereo matrix |
| Gain | Unbalanced output: -6 dB; balanced output 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >102 dB at maximum output (21 dBu, unweighted) (balanced) |
| Crosstalk | <-95 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >98 dB @ 1 kHz |
| CMRR | >70 dB @ 20 Hz to 20 kHz |
|
| Audio input — SMX 84/88/1616 A (analog) |
|---|
| Number/signal type | 8 or 16 stereo, balanced/unbalanced |
| Connectors | (8 or 16) 3.5 mm captive screw connector, 5 pole |
| Impedance | >10k ohms unbalanced/balanced, DC coupled |
| Nominal level | 0 dBu (0.775 Vrms) |
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 1% THD+N |
| Input gain adjustment | –18 dB to +24 dB, adjustable per input; default = 0 dB |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — SMX 84/88/1616 A (analog) |
|---|
| Number/signal type | 4, 8, or 16 stereo, balanced/unbalanced |
| Connectors | (8 or 16) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 0.1% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 0.1% THD+N |
| Volume control range | -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB) |
| NOTE | Attenuation = volume number minus 64. The default is 0 dB = volume number 64. |
|
|
| Control/remote — switcher host ports |
|---|
| Serial host control port | 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack |
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| 9-pin female D connector | |
| RS-232 | 2 = Tx, 3 = Rx, 5 = Gnd |
| RS-422 | 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+ |
| Mini stereo jack | |
| RS-232 | Tip = Tx, ring = Rx, sleeve = Gnd |
| Ethernet control port | 1 female RJ-45 |
| Ethernet data rate (for network communication) | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
| Ethernet default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set™ (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet |
|
| General |
|---|
| Power supply | Internal, with or without redundant power supply
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 15.0 to 180 watts, depending on configuration |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, left to right (as viewed from front panel) |
| Thermal dissipation, full load | 50 to 620 BTU/hr, depending on configuration |
| Mounting | |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.) |
| SMX 200 Frame | 3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D) |
| SMX 300 Frame | 5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D) |
| SMX 400 Frame | 7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D) |
| SMX 500 Frame | 8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D) |
| Product weight with boards installed |
| SMX 200 Frame | 16.2 lbs (7.3 kg) |
| SMX 300 Frame | 18.1 lbs (8.2 kg) |
| SMX 400 Frame | 20.3 lbs (9.2 kg) |
| SMX 500 Frame | 23.9 lbs (10.8 kg) |
| Shipping weight with boards installed |
| SMX 200 Frame | 20 lbs (10 kg) |
| SMX 300 Frame | 22 lbs (10 kg) |
| SMX 400 Frame | 26 lbs (12 kg) |
| SMX 500 Frame | 30 lbs (14 kg) |
| Shipping weight of individual boards, if purchased separately | |
| SMX 88 FOX | 2 lbs (1 kg) |
| SMX 1616 FOX | 3 lbs (2 kg) |
| DIM weight | |
| SMX 400 Frame | 30 lbs (14 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, KCC, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.1-060115-D29) |