Produkte - Startseite
Verstärker
Verstärker
Netzwerk-Verstärker
XPA U 1004C
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2003C XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 1004C XPA U 2002 SB XPA U 3502 XPA U 358 XPA U 358C XPA U 758

Drucken

Pro

XPA U 1004C

Kombi-Verstärker mit vier Kanälen - 100 W je Kanal

Hauptmerkmale

Zwei 100 W-Kanäle an 8 Ω oder 4 Ω
Zwei 100 W-Kanäle bei 70/100 V
ENERGY STAR^®-konformer Verstärker
Extrons patentierte CDRS™ (Class D Ripple Suppression)-Technologie
Lüfterlose Kühlung - kann ohne zusätzlichen Rackplatz für Belüftung übereinander gestapelt werden
Vier Kanäle in einem 1 HE hohen Gehäuse mit 1/2-Rackbreite und Hardware, um einen einzelnen oder zwei Verstärker nebeneinander in ein Rack zu montieren
Deaktivierung des automatischen Standby-Modus mit schnellem Wiedereinschalten
Alle Merkmale

XPA U 1004C Four Channel 100 watt Amplifier Family

XPA U 1004C-70V - Four Channel Combo Amp, 100 watts per channel

XPA U 1004C-100V - Four Channel Combo Amp, 100 watts per channel

XPA U 1004C with Optional Flexible Conduit Adapter Kit (70-228-02)

Previous Next

Bildergalerie

Interaktive Übersicht

Auszeichnungen

The AVard '20-Gewinner
2019 Innovative Products von Sound & Video Contractor

Produktbesprechung

Funktionen vergleichen

Hilfsmittel zur Audioberechnung

Auswahlhilfe Verstärker

Dieses neue Tool erlaubt Ihnen jetzt, Verstärkermodelle nach Merkmalen zu suchen

Ausschreibungstexte

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der Extron XPA U 1004C ist ein ENERGY STAR-konformer Audio-Verstärker mit vier 100 W-Kanälen in einem 1 HE hohen Plenum-zertifizierten Gehäuse von 1/2-Rackbreite mit lüfterloser Kühlung und Hardware zur Rackmontage. Der XPA U 1004C-70V liefert gleichzeitig zwei 100 W-Kanäle bei 8 oder 4 Ω und zwei 100 W-Kanäle bei 70 V, währenddessen der XPA U 1004C-100V simultan zwei 100 W-Kanäle bei 8 oder 4 Ω und zwei 100 W-Kanäle bei 100 V liefert. Der XPA U 1004C bietet eine beispiellose Kanaldichte und benötigt bei der Installation im Medienrack keinen Raum für Belüftung, wodurch wertvoller Platz eingespart wird. Er verfügt über ein sehr effizientes, fortschrittliches Klasse D-Verstärkerdesign mit Korrektur des Leistungsfaktors, extrem niedrigem Einschaltstrom, Deaktivierung der automatischen Abschaltung mit schnellem Wiederhochfahren sowie unsere patentierte CDRS-Technologie - Class D Ripple Suppression.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

XPA U 1004C

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

XPA U 1004C-70V

Provide a compact, energy efficient audio amplifier that shall support four analog inputs, two amplified outputs with 100 watts rms power output per channel into 4 or 8 ohms, and two amplified outputs with 100 watts rms into a 70 volt line.
1. Compact amplifier that delivers two channels of 100 watts rms power output into 4 or 8 ohms plus two channels with 100 watts rms into a 70 volt line, and includes ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two low impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall support two high impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    3. Shall provide 100 watts rms per low impedance channel into 4 ohms or 8 ohms measured at 1kHz with 0.1% THD
    4. Shall provide 100 watts rms per high impedance channel into a 70 volt line measured at 1 kHz with 0.1% THD
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall support a minimum load impedance of 4 ohms for channels 1 and 2
    7. Shall support a minimum load impedance of 50 ohms for channels 3 and 4
    8. Shall provide a THD+N measurement of 0.1%, measured at 1 kHz, and 3 dB below clipping
    9. Shall provide a damping factor of greater than 100 at 8 ohms, for channel 1 and 2
    10. Shall provide a damping factor of greater than 100 at 143 ohms, for channels 3 and 4
    11. Shall provide a selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff on the high impedance channels
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 68.9 watts during typical (1/8 power) operation with two output channels driven with 4 ohm loads and two output channels at 70 volts
    2. Shall draw 67.0 watts during typical (1/8 power) operation with two output channels driven with 8 ohm loads and two output channels at 70 volts
    3. Shall draw 8.2 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide an internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide a 2-pole, 3.5 mm captive screw connector for selecting a high pass filter to roll off frequencies below 80 Hz on the high impedance channels
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, ENERGY STAR, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 1004C-70V, part number 60-1852-01; no alternates or equals.

XPA U 1004C-70V

Provide a compact, energy efficient audio amplifier that shall support four analog inputs, two amplified outputs with 100 watts rms power output per channel into 4 or 8 ohms, and two amplified outputs with 100 watts rms into a 70 volt line.
1. Compact amplifier that delivers two channels of 100 watts rms power output into 4 or 8 ohms plus two channels with 100 watts rms into a 70 volt line, and includes ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two low impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall support two high impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    3. Shall provide 100 watts rms per low impedance channel into 4 ohms or 8 ohms measured at 1kHz with 0.1% THD
    4. Shall provide 100 watts rms per high impedance channel into a 70 volt line measured at 1 kHz with 0.1% THD
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall support a minimum load impedance of 4 ohms for channels 1 and 2
    7. Shall support a minimum load impedance of 50 ohms for channels 3 and 4
    8. Shall provide a THD+N measurement of 0.1%, measured at 1 kHz, and 3 dB below clipping
    9. Shall provide a damping factor of greater than 100 at 8 ohms, for channel 1 and 2
    10. Shall provide a damping factor of greater than 100 at 143 ohms, for channels 3 and 4
    11. Shall provide a selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff on the high impedance channels
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 68.9 watts during typical (1/8 power) operation with two output channels driven with 4 ohm loads and two output channels at 70 volts
    2. Shall draw 67.0 watts during typical (1/8 power) operation with two output channels driven with 8 ohm loads and two output channels at 70 volts
    3. Shall draw 8.2 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide an internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide a 2-pole, 3.5 mm captive screw connector for selecting a high pass filter to roll off frequencies below 80 Hz on the high impedance channels
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, ENERGY STAR, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 1004C-70V, part number 60-1852-01; no alternates or equals.

XPA U 1004C-100V

Provide a compact, energy efficient audio amplifier that shall support four analog inputs, two amplified outputs with 100 watts rms power output per channel into 4 or 8 ohms, and two amplified outputs with 100 watts rms into a 100 volt line.
1. Compact amplifier that delivers two channels of 100 watts rms power output into 4 or 8 ohms plus two channels with 100 watts rms into a 100 volt line, and includes ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two low impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall support two high impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    3. Shall provide 100 watts rms per low impedance channel into 4 ohms or 8 ohms measured at 1kHz with 0.1% THD
    4. Shall provide 100 watts rms per high impedance channel into a 100 volt line measured at 1 kHz with 0.1% THD
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall support a minimum load impedance of 4 ohms for channels 1 and 2
    7. Shall support a minimum load impedance of 100 ohms for channels 3 and 4
    8. Shall provide a THD+N measurement of 0.1%, measured at 1 kHz, and 3 dB below clipping
    9. Shall provide a damping factor of greater than 100 at 8 ohms, for channel 1 and 2
    10. Shall provide a damping factor of greater than 100 at 100 ohms, for channels 3 and 4
    11. Shall provide a selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff on the high impedance channels
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 69.2 watts during typical (1/8 power) operation with two output channels driven with 4 ohm loads and two output channels at 100 volts
    2. Shall draw 67.6 watts during typical (1/8 power) operation with two output channels driven with 8 ohm loads and two output channels at 100 volts
    3. Shall draw 8.3 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide an internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide a 2-pole, 3.5 mm captive screw connector for selecting a high pass filter to roll off frequencies below 80 Hz on the high impedance channels
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, ENERGY STAR, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 1004C-100V, part number 60-1852-11; no alternates or equals.

XPA U 1004C-100V

Provide a compact, energy efficient audio amplifier that shall support four analog inputs, two amplified outputs with 100 watts rms power output per channel into 4 or 8 ohms, and two amplified outputs with 100 watts rms into a 100 volt line.
1. Compact amplifier that delivers two channels of 100 watts rms power output into 4 or 8 ohms plus two channels with 100 watts rms into a 100 volt line, and includes ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two low impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    2. Shall support two high impedance speaker level signals on one 4-pole, 5 mm screw-lock captive screw connector
    3. Shall provide 100 watts rms per low impedance channel into 4 ohms or 8 ohms measured at 1kHz with 0.1% THD
    4. Shall provide 100 watts rms per high impedance channel into a 100 volt line measured at 1 kHz with 0.1% THD
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall support a minimum load impedance of 4 ohms for channels 1 and 2
    7. Shall support a minimum load impedance of 100 ohms for channels 3 and 4
    8. Shall provide a THD+N measurement of 0.1%, measured at 1 kHz, and 3 dB below clipping
    9. Shall provide a damping factor of greater than 100 at 8 ohms, for channel 1 and 2
    10. Shall provide a damping factor of greater than 100 at 100 ohms, for channels 3 and 4
    11. Shall provide a selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff on the high impedance channels
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 69.2 watts during typical (1/8 power) operation with two output channels driven with 4 ohm loads and two output channels at 100 volts
    2. Shall draw 67.6 watts during typical (1/8 power) operation with two output channels driven with 8 ohm loads and two output channels at 100 volts
    3. Shall draw 8.3 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide an internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide a 2-pole, 3.5 mm captive screw connector for selecting a high pass filter to roll off frequencies below 80 Hz on the high impedance channels
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, ENERGY STAR, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 1004C-100V, part number 60-1852-11; no alternates or equals.

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

XPA U 1004C -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.