Produkte - Startseite
Steuerung und Automatisierung
Controller zur Automatisierung von Arbeitsbereichen
Apps LinkLicenses zur Systemsteuerung Gerätetreiber eBUS-Produkte Firmware GlobalViewer Enterprise IP Link Pro xi-Steuerungsprozessoren IR-Fernbedienungen u. Bedienfelder MediaLink Plus-Controller Netzwerk-Tastenfelder Software TouchLink Pro-Touchpanels Hilfsprogramme Virtuelle Steuerung
WC Pro 160
HD CTL 100 WC Pro 150 OCS WC Pro 160

Twitter Link kopieren

Drucken

Pro

WC Pro 160

Controller mit EDID Minder zur Automatisierung von Arbeitsbereichen

Hauptmerkmale

Out of the Box-Funktionalität unterstützt die Displaysteuerung über CEC von einem HDMI-Anschluss
Unterstützt Videoauflösungen bis zu 4K/60 bei 4:4:4
EDID Minder^® verwaltet automatisch die EDID-Kommunikation zwischen den angeschlossenen Geräten
Überwachung und Steuerung über Ethernet
Die integrierte Webseite ermöglicht einfache Konfigurationen sowie das Ein- und Ausschalten des Displays mit einer Ethernet-, RS-232- oder IR-Steuerungsmethode
LinkLicense für einen WC Pro-Steuerungsprozessor bietet mehrere Verbesserungen
Alle Merkmale

Previous Next

Bildergalerie

Interaktive Übersicht

Produkt-Hilfe

Ausschreibungstexte

Eine LinkLicense aktivieren

Anleitungsvideos zur Software

Generierung eines universellen Zugriffsschlüssels

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der WC Pro 160 von Extron ist ein kompakter Ethernet-fähiger Controller mit EDID Minder zur Automatisierung der Displaysteuerung in beliebig großen Arbeitsbereichen. Er kann einfach direkt eingesetzt werden und wenn ein aktives Signal am HDMI-Eingang erkannt wird, dann wird das Display eingeschaltet. Ein optionaler Präsenzsensor kann auch genutzt werden, um das Display einzuschalten, wenn jemand den Bereich betritt und wieder auszuschalten, wenn keine Bewegungen mehr erkannt werden. Falls seine Funktionen zusätzlich angepasst werden müssen, dann kann mit der integrierten Webseite die Steuerung eines einzelnen Displays über Ethernet, RS-232 oder IR konfiguriert werden. Der WC Pro 160 hat ein kompaktes Metallgehäuse, das diskret hinter einem Display oder unter einem Tisch montiert werden kann.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

WC Pro 160

USB Extender xi-Serie

WC Pro 160

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

WC Pro 160 -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Objekt per E-Mail teilen

WC Pro 160

Controller mit EDID Minder zur Automatisierung von Arbeitsbereichen

Senden an: *

Geben Sie bitte eine gültige E-Mail-Adresse ein.

Nachricht:

( verbleibende Zeichen)

Kopie an mich selbst verschicken

Vielen Dank. Ihre E-Mail wurde verschickt.

Beim senden Ihrer E-Mail ist ein Fehler unterlaufen. Bitte versuchen Sie es später erneut.