Produkte - Startseite
Kabeltreiber & Extender
USB-Extender
HDMI-Extender DVI-Extender DisplayPort-Extender HD‑SDI-, 3G‑SDI und 12G‑SDI-Extender VGA- & RGB-Kabeltreiber und -Extender AV-Kabeltreiber & -Extender Drahtlose Extender
FOX USB Extender Plus
FOX USB Extender Plus UCS 900-Serie USB Extender Plus-Serie

Drucken

Pro

FOX USB Extender Plus

Glasfaser-Extender für USB-Peripheriegeräte

Hauptmerkmale

Überträgt die USB-Signale von Peripheriegeräten über sehr lange Glasfaserstrecken
Unterstützt USB 2.0- nach 1.0-Geräte und USB 3.0-Geräte, die mit USB 2.0-Datenraten bis zu 480 Mbps betrieben werden können
Der Empfänger hat einen integrierten Hub mit vier Anschlüssen und 5 V, 500 mA an jedem Anschluss
Emulationsmodus für Peripheriegeräte
LED-Anzeigen für den Echtzeitstatus zur Fehlerbehebung und Überwachung
Kompatibel mit den Extron-Kreuzschienen der FOX-Serie für Signalverteilungssysteme bis zu 1000x1000 und größer
Alle Merkmale

Previous Next

Bildergalerie

Interaktive Übersicht

Empfohlene Videos

Ausschreibungstexte

Hinweis: Der FOX USB Extender ist nicht kompatibel mit den FOX USB Extender Plus-Produkten.

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der FOX USB Extender Plus von Extron ist ein Sender- und Empfängerset für die Glasfaser-Übertragung von USB-Signalen über große Entfernungen. Der Sender bietet eine zuverlässige und herausragende Leistung und nutzt die vollständig digitale Extron-Technologie für eine perfekte Bildübertragung. Der Glasfaser-Extender ist mit USB 3.0-, 2.0-, 1.1- und 1.0-Geräten mit Datentransferraten bis zu 480 Mbps kompatibel. Der speziell für AV‑Systeme entwickelte FOX USB Extender Plus bietet zahlreiche integrationsfreundliche Funktionen, wie z. B. Emulation für Peripheriegeräte, einen aktiven Hub mit vier Anschlüssen und 5 V, 500 mA pro Anschluss sowie Systemüberwachung in Echtzeit. Die kompakten, flachen Gehäuse erlauben eine unauffällige Montage.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

FOX USB Extender Plus

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

FOX USB Extender Plus -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.