Produkte - Startseite
Kabeltreiber & Extender
USB-Extender
HDMI-Extender DVI-Extender DisplayPort-Extender HD‑SDI-, 3G‑SDI und 12G‑SDI-Extender Drahtlose Extender
USB Extender xi-Serie
FOX USB Extender Plus UCS 900-Serie UCS 910-Serie USB Extender Plus-Serie USB Extender xi-Serie

Twitter Link kopieren

Drucken

Neu Pro

USB Extender xi-Serie

Twisted Pair-Extender für USB

Hauptmerkmale

Übertagung der Signale von USB-Peripheriegeräten bis zu 600 m über ein Gigabit-Ethernet-Netzwerk
Punkt zu Punkt-Übertragung von USB-Peripheriegeräte-Signalen bis zu 100 m über ein CATx-Kabel
Unterstützt High Speed (USB 2)- und frühere Geräte, die mit USB 3-Geräten kompatibel sind, die mit High-Speed-Datenraten betrieben werden können
Der Sender kann vom Host-Gerät oder dem beigefügten Netzteil mit Strom versorgt werden
Der Empfänger hat einen integrierten Hub mit vier Anschlüssen und 5 V, 500 mA an jedem Port
Auswahl aus Modellen zur Rackmontage und zum Einbau
Alle Merkmale

Previous Next

Bildergalerie

Interaktive Übersicht

Compare Features

Ausschreibungstexte

Hinweis: Die USB Extender xi-Serie ist nicht kompatibel mit den Produkten der USB Extender Plus-Serie.

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Die USB Extender xi-Serie überträgt und schaltet USB-Signale von Peripheriegeräten zu einem bis zu 600 m weit entfernten Host-Computer über ein Gigabit-Ethernet-Netzwerk oder bis zu 100 m weit über ein CATx-Kabel in Punkt zu Punkt-Anwendungen um. Sie unterstützt High-Speed (USB 2) und frühere Geräte. Der Sender kann vom Host-Computer oder beigefügten Netzteil mit Strom versorgt werden und verfügt über eine Emulation für USB-Peripheriegeräte für ein störungsfreies Booten eines Host-Computers, der nicht mit einer Tastatur oder Maus verbunden ist. Der Empfänger hat einen eingebauten, aktiven Hub mit vier Anschlüssen und bis zu 500 mA pro Anschluss. Der Controller ermöglicht eine einfache Einrichtung und Steuerung für ein verteiltes USB-Matrix-Schaltsystems über ein Ethernet-Netzwerk. Die USB Extender xi-Serie unterstützt USB-Peripheriegeräte, wie z. B. Computertastaturen und -mäuse, Massenspeichergeräte und Webcams in professionellen AV-Umgebungen.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

USB Extender xi-Serie

PCC-1 18/500

Eine RJ-45-Einbaubuchse auf Klemmanschluss - Neutrik EtherCon

Eine RJ-45-Einbaubuchse auf Klemmanschluss - Daten

Eine RJ-45-Einbaubuchse, Buchse auf Buchse - Daten

HDMI DA-Serie

ATB 100

USB Extender xi-Serie

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi T

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0, USB 2.0, or USB 1.1 hosts
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T (60-1964-12); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi R

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R (60-1964-13); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi T D

Provide a transmitter for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type mini B connector located on the front panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T D (60-1966-12); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R D

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a wall-mountable enclosure that fits within standard US one-gang electrical box
    1. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R D (60-1966-13); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi R AAP

Provide a receiver for extending signals from USB peripheral devices such as human interface devices, imaging devices, mass storage devices, and other USB devices over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the front panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the rear panel
  11. Shall provide a recessed button located on the rear panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a architectural adapter plate module enclosure that fits within an AV connectivity mounting frame
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi R AAP (60-1965-22); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi T HID

Provide a transmitter for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair transmitter for USB peripherals
  1. Shall be paired with a receiver to provide extension of USB peripheral devices up to 330 feet (100 meters) from the host device over one CATx twisted pair cable
  2. Shall be paired with a receiver through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall support up to four receivers via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide connection for the host computer on one USB Type B connector located on the rear panel
    1. Shall provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Shall provide the capability to configure the unit with peripheral emulation disabled
    3. Shall support VBUS power from the host PC
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the transmitter on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, and host status
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender xi T HID (60-1967-12); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Extender xi R HID

Provide a receiver for extending signals from USB human interface peripheral devices only, over a single CATx cable in a point-to-point configuration or via a Gigabit Ethernet network.
1. Twisted pair receiver for USB peripherals
  1. Shall be paired with a transmitter to provide extension of USB peripheral devices up to 330 feet (100 meters) over one CATx twisted pair cable
  2. Shall be paired with a transmitter through a Gigabit Ethernet switch to provide extension of USB peripheral devices up to 660 feet (200 meters) from the host device within an IP network
  3. Shall allow up to four receivers to be paired with a single transmitter via an IP network using a Gigabit Ethernet switch
  4. Shall be compatible with up to five Gigabit Ethernet switches to provide extension of USB peripheral devices up to 1,980 feet (600 meters) within an IP network
  5. Shall support USB 2.0, 1.1, or 1.0 peripherals
  6. Shall support USB 3.0 peripherals that can operate at USB 2.0 rates
  7. Shall support data transfer rates up to High-Speed
  8. Shall provide four USB Type A ports located on the rear panel for simultaneous connection of up to four USB peripheral devices
    1. Each USB port shall provide 5 VDC, 500 mA power
  9. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel
  10. Shall provide connection for configuration of the receiver on one USB Type C connector located on the front panel
  11. Shall provide a recessed button located on the front panel to pair a transmitter to a receiver
  12. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  13. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1-inch (2.5 cm) high, quarter rack width, low profile metal enclosure
    1. Rack mountable with optional rack shelf
    2. Wall or furniture mountable with optional mounting kits
  2. Shall provide LED indicators located on the front panel for power, link status, host status, and port activity between an active host and each connected peripheral device
  3. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  4. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Extender Plus R HID (60-1967-13); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

USB Matrix Controller xi

Provide a matrix controller for switching USB signals using up to 64 USB Extender Plus Series or USB Extender xi Series transmitters and receivers connected to USB hosts and peripherals such as human interface devices, imaging devices, mass storage devices, and other USB devices over CATx cable via a Gigabit Ethernet network.
1. Twisted pair matrix controller for up to 64 USB Extender xi Series or USB Extender Plus Series transmitters and receivers
  1. Shall support central control of USB Extender xi and USB Extender Plus transmitters and receivers using CATx cabling connected to an Ethernet network
    1. USB Extender xi and USB Extender Plus transmitters/receivers can only connect to the same model series and will not work between series
  2. Shall support 10/100/100Base-T Ethernet
  3. Shall support Extron PCS software for matrix configuration and loading transmitter and receiver IP address information
  4. Shall support simple SIS commands to control USB switching using an Extron control system or a third party control system
  5. Shall provide connection for twisted pair cable on one female RJ-45 connector located on the rear panel for communication with USB Extender xi Series or USB Extender Plus transmitters/receivers and for integration into a control system
  6. Shall provide one (1) bidirectional RS-232 connector on rear panel for integration into a control system
  7. Shall provide connection for 12 VDC power on one 2-pole, 3.5 mm captive screw connector located on the rear panel
  8. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
2. General requirements
  1. Shall be available in a 1.7 inch (4.3 cm) high, quarter rack width metal enclosure
  2. Shall provide front panel port status indicators for Tx, Rx, RTS, and CTS
  3. Shall be plenum rated to meet UL 2043 standards for heat and smoke release, excluding power supply
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  5. Shall provide at least three years parts and labor warranty
3. Approved device shall be the Extron USB Matrix Controller xi (60-2022-01); no alternates or equals.

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

USB Extender xi-Serie -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Objekt per E-Mail teilen

USB Extender xi-Serie

Twisted Pair-Extender für USB

Senden an: *

Geben Sie bitte eine gültige E-Mail-Adresse ein.

Nachricht:

( verbleibende Zeichen)

Kopie an mich selbst verschicken

Vielen Dank. Ihre E-Mail wurde verschickt.

Beim senden Ihrer E-Mail ist ein Fehler unterlaufen. Bitte versuchen Sie es später erneut.