XTP CP 4i 12G‑SDI‑Modul

XTP CP 4i 12G-SDI

1. Provide a four (4) input 12G-SDI video board with SDI and HDMI input loop-through that is compatible with XTP matrix switchers and occupies one (1) input slot
   1. Video input requirements
      1. Shall provide four (4) BNC connectors for 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SDI video
      2. Shall accept 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SDI signals from 1.49 Gbps to 11.88 Gbps
      3. Shall automatically adapt to SMPTE and ITU digital video standards for 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SDI formats
      4. Shall support video resolutions with 4:2:2 chroma sampling up to 4096x2160 at 60 Hz and 3840x2160 at 60 Hz with 10-bit color depth
      5. SDI loop-throughs shall pass ancillary data including embedded audio, closed caption, time code, and more
      6. Shall provide automatic cable equalization for each input
      7. Shall be immune to pathological signal patterns
   2. Video output requirements
      1. Shall convert 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SDI signals for long distance transmission within XTP Systems
      2. Shall provide four (4) buffered BNC loop-through connectors to support local monitors or additional distribution needs
      3. Shall provide four (4) buffered female HDMI type-A loop-through connectors to support local monitors or additional distribution needs
      4. Shall provide reclocking on buffered loop-throughs
   3. Audio requirements
      1. Shall support embedded AES audio, SMPTE 272M and SMPTE 299M
      2. Shall support two channel AES audio extraction
      3. Shall provide audio breakaway to enable independent audio and video switching
      4. Shall provide audio input adjustments for gain and attenuation
      5. Shall provide selectable input audio options, between digital two-channel, and digital multi-channel audio formats
   4. General requirements
      1. Shall include Extron Digital Sync Validation Processing– DSVP™ technology to verify data rates and transmit the information through the Ethernet port on the XTP matrix switcher frame
      2. Shall be hot-swappable
      3. Shall be compatible with XTP CrossPoint and XTP II CrossPoint matrix switchers
   5. Approved device shall be the Extron XTP CP 4i 12G-SDI (70-11710-01); no alternates or equals