Produkte - Startseite
Verstärker
Netzwerk-Verstärker
Verstärker
NetPA U 1002
NetPA 1001-70V AT NetPA U 1002 NetPA U 1004 NetPA U 2002 SB NetPA U 8001 SUB

Drucken

Pro

NetPA U 1002

Verstärker mit zwei Kanälen mit Dante und DSP
100 W je Kanal

Hauptmerkmale

100 W eff. Ausgangsleistung pro Kanal an 8 Ω, 4 Ω oder 70/100 V
ENERGY STAR-konformer Verstärker mit Auto-Standby
InstaWake™ fährt in weniger als 100 Millisekunden aus dem Standby hoch
Integrierter DSP mit 6x6-Matrix-Mischer
Die Unterstützung der Dante Domain Manager-Software und des AES67-Standards gewährleistet eine breite Kompatibilität mit unternehmenseigenen Konfigurationen und anderen vernetzten Audiogeräten
Lüfterlose Kühlung – können ohne zusätzlichen Rackplatz für Belüftung übereinander gestapelt werden
Alle Merkmale

XPA U 1002 Two Channel 100 watt Amplifier Family

NetPA U 1002 – 2 Channels, 100 watts – 8 or 4 ohms

NetPA U 1002-70V – 2 Channels, 100 watts – 70 volts

NetPA U 1002-100V – 2 Channels, 100 watts – 100 volts

NetPA U 1002 with optional Flexible Conduit Adapter Kit (70-228-02)

Previous Next

Bildergalerie

Interaktive Übersicht

Auszeichnungen

SVC Innovative Product Awards 2020
Favorite Audio Product, rAVe Readers' Choice Awards 2022

Produktbesprechung

Funktionen vergleichen

Hilfsmittel zur Audioberechnung

Auswahlhilfe Verstärker

Dieses neue Tool erlaubt Ihnen jetzt, Verstärkermodelle nach Merkmalen zu suchen

Ausschreibungstexte

Fallstudien

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der Extron NetPA U 1002 ist ein Dante-fähiger, ENERGY STAR-konformer Verstärker mit zwei 100 W-Kanälen in einem 1 HE hohen Plenum-zertifizierten Gehäuse von halber Rackbreite. Mit seinem integriertem DSP-Prozessor bietet der NetPA U 1002 grundlegende Signalverarbeitungs-Funktionen. Damit erfüllt er die Anforderungen komplexer, dezentralisierter Systeme und ermöglicht mit Support für Dante Domain Manager und AES67 eine breite Kompatibilität mit unternehmenseigenen Konfigurationen und anderen vernetzten Audiogeräten. Das außergewöhnliche thermale Design erlaubt die Installation im Medienrack, ohne Platz für Belüftung zu verschwenden. Dies spart wertvollen Rackplatz. Der NetPA U 1002 ist ein hocheffizienter Klasse‑D-Verstärker, der mit abschaltbarem automatischem Standby-Modus mit schnellem Wiederhochfahren und unserer patentierten CDRS-Technologie (Class D Ripple Suppression) ausgestattet ist.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

NetPA U 1002

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

NetPA U 1002

Kompakter, energieeffizienter Audioverstärker mit geringer Abwärme, zwei digitalen Audioeingängen über ein Dante-Audionetzwerk, zwei digitalen Audioausgängen an ein Dante-Audionetzwerk, vier analogen Mikrofon/Linepegel-Eingängen, zwei verstärkten Ausgängen und zwei Linepegel-Ausgängen
1. Kompakter Verstärker mit 100 W eff. Ausgangsleistung je Kanal, Dante-Audionetzwerk und ENERGY STAR®-Konformität
  1. Eingänge
    1. Zwei digitale Audioeingänge, über einen RJ-45-Stecker von einem Dante-Netzwerk
    2. Vier symmetrische oder unsymmetrische Mikrofon/Linepegel-Signale an zwei 6-poligen 3,5 mm-Schraubklemmleisten
  2. Ausgänge
    1. Zwei symmetrische oder unsymmetrische Linepegel-Signale an einer 6-poligen 3,5 mm-Schraubklemmleiste
      1. Ausgänge mit Dante-Durchgangsbuchse
    2. Vier digitale Audioausgänge, über einen RJ-45-Anschluss an ein Dante-Audionetzwerk gesendet
    3. Zwei Lautsprecherpegel-Signale an einer 4 poligen 3,5 mm-Schraubklemmleiste mit Schraubensicherung
      1. 100 W eff. Ausgangsleistung pro Kanal mit allen Kanälen an 4 Ω oder 8 Ω, gemessen bei 1 kHz mit 0,1 % Klirrfaktor
      2. Signal-Rausch-Verhältnis mindestens 90 dB, gemessen von 20 Hz bis 20 kHz, ungewichtet
      3. Minimale Lastimpedanz von 4 Ω
      4. Klirrfaktor von 0,1 %, gemessen bei 1 kHz, bei 8 Ω und 3 dB unter Begrenzung
  3. DSP-Prozessor
    1. Integrierter DSP-Audioprozessor
    2. Mit dem Matrix-Mischer können alle Eingänge und virtuellen Busse (Returns) zu einem oder allen Ausgängen geleitet werden
    3. 6 DSP-Eingangskanäle mit Filtern, Dynamik und Verstärkungsverarbeitung
    4. 6 DSP-Ausgangskanäle mit Verzögerung, Filtern, Dynamik und Dämpfung
  4. Konfigurationssoftware
    1. PC-basierte Konfigurationsanwendung
    2. Live-Modus zur Steuerung der Parameter in Echtzeit
    3. Emulationsmodus zur Offline-Konfiguration
    4. Ein einziges, scrollbares Fenster zur Anzeige von Ein- und Ausgängen, Audioverarbeitungs-Blöcken, Routing, Mischstellen sowie virtuellen Verbindungen
    5. Einrichtung und Konfiguration der digitalen Audioverarbeitungs-Tools
      1. Filter (Hochpass, Tiefpass, Tiefen, Höhen und parametrischer EQ)
      2. Dynamikverarbeitung (Kompressor/Limiter)
      3. Verzögerungsverarbeitung
      4. Ducking
    6. Ausschneiden-, Kopieren- und Einfügen-Funktion für die Verarbeitungsblöcke
    7. Matrix-Routing mit Verstärkungseinstellung pro Koppelpunkt zwischen Eingängen und Ausgängen
    8. Bibliothek mit vorgefertigten Prozessoreinstellungen
    9. Hauptgruppen
    10. Begrenzung der Einstellbereiche
    11. Presets zum Abruf aller Einstellungen
    12. Echtzeit-Messung der Pegel im Live-Modus in jedem Verarbeitungsblock für Eingangsverstärkung, Kompressor, Limiter und Ausgangsdämpfung
    13. Fenster mit Pegelskala (Meter Bridge) zur Echtzeit-Messung aller Eingangs- und Ausgangskanäle mit Übersteuerungsanzeige im Live-Modus
    14. Navigation der Konfigurationssoftware über die Tastatur
    15. Speichern von Dateien im Live- und Emulationsmodus
    16. Hochladen der Konfigurationsdatei im Live-Modus
    17. Konfiguration und Dateispeicherung von mehreren miteinander verbundenen oder vernetzten Prozessoren in einer einzigen Konfigurationssitzung
  5. Verstärker
    1. Klasse-D-Verstärkerdesign
    2. Class D Ripple Suppression-Technologie
    3. Lüfterlose Kühlung
    4. Automatischer Clip-Limiter
    5. Mehrere Schutzschaltungen werden bei Kurzschlüssen, Überhitzung oder Gleichstromfehlern sofort aktiviert
    6. Korrektur des Leistungsfaktors beseitigt Oberwellen auf der Netzzuleitung
  6. Dante-Audionetzwerk
    1. Empfängt Kanäle über ein Netzwerk mit Standard-Internetprotokollen
      1. Vier Dante-Kanäle werden mit dem DSP-Eingangsbereich verbunden
    2. Sendet Kanäle über ein Netzwerk mit Standard-Internetprotokollen
      1. Vier Dante-Kanäle werden mit dem DSP-Ausangsbereich verbunden
    3. Dante-Controller-Software zur Konfiguration von Audionetzwerken
    4. Netzwerk-Managementsoftware Dante Domain Manager für Netzwerksicherheit und zur logischen Segmentierung
    5. AES67-Standard für Interoperabilität mit anderen AES67-Geräten
    6. RJ-45-Anschluss zur Verbindung mit dem Dante-Audionetzwerk
    7. Synchronisation mit der Hauptuhr im Dante-Netzwerk
    8. Unkomprimiertes digitales Audio mit einer Abtastrate von 48 kHz und 24 Bit-Auflösung
  7. Stromversorgung
    1. 38,7 W Verbrauch bei normalem Betrieb (1/8 Leistung) mit allen Ausgangskanälen bei 4 Ω-Belastung
    2. 37 W Verbrauch bei normalem Betrieb (1/8 Leistung) mit allen Ausgangskanälen bei 8 Ω-Belastung
    3. 8 W Verbrauch im Ruhezustand
    4. Standby-Energiesparmodus
      1. Standby-Modus nach 25 min Inaktivität
      2. Verbraucht im Standby-Modus 4 W oder weniger
      3. Bei einem erneuten Signal in weniger als 100 ms betriebsbereit
      4. Abschaltbarer automatischer Standby-Timer
    5. ENERGY STAR-konform
    6. Internes Universalnetzteil mit IEC-Buchse und Unterstützung internationaler 100 240 V Wechselstrom-Standards
  8. Steuerung
    1. Anschluss zur Fernsteuerung des Standby-Modus an Schraubklemmleisten
    2. Support für bidirektionales RS 232 an Schraubklemmleisten
    3. Fernsteuerung über externes Steuerungssystem mit Befehlen über RS-232, Dante-Netzwerk oder USB
  9. Gerätevorderseite
    1. LED zur Anzeige der Betriebsspannung
    2. Grüne LED-Leuchten zur Anzeige der Signalpräsenz am Eingang
    3. Rote LED-Leuchten zur Warnung bei Übersteuerung und Anzeige der Aktivierung der Schutzschaltung
    4. Rote LED zur Anzeige einer überhöhten Gehäusetemperatur
  10. Geräterückseite
    1. RJ-45-Anschluss für digitale Dante-Audionetzwerkverbindung und bis zu vier eingehende digitale Audiokanäle
    2. Vier Mikrofon/Linepegel-Eingänge an zwei Schraubklemmleisten
    3. Zwei symmetrische oder unsymmetrische Linepegel-Ausgänge an einer Schraubklemmleiste
    4. Zwei Lautsprecherausgänge an einer Schraubklemmleiste mit Schraubensicherung
    5. Anschluss zur Fernsteuerung des Standby-Modus an einer Schraubklemmleisten
    6. Bidirektionaler RS-232-Anschluss an einer Schraubklemmleiste
    7. Grüne LED zur Anzeige des Synchronisationstatus mit der Hauptuhr im Dante-Netzwerk
  11. Allgemeines
    1. Rackmontierbares, 1 HE hohes Metallgehäuse mit halber Rackbreite
    2. Mit Hardware zur Rackmontage
    3. Betriebsbestimmungen
      1. CE, c-UL und UL
      2. UL 60065, IEC 60065 und BSEN 60065 für Sicherheit
      3. UL-eingetragen
      4. Konformität mit CE, C-Tick, EN 55103-1, EN 55103-2, FCC Klasse B, ICES und VCCI Klasse B
      5. ENERGY STAR, EU-Verhaltensregeln, RoHS und WEEE
    4. Drei Jahre Garantie auf Material und Verarbeitung
    5. Sieben Jahre Garantie auf Material und Verarbeitung des Netzteils
Empfohlenes Produkt: Extron NetPA U 1200 (Teilenummer 60-1767-01)

NetPA U 1002

Kompakter, energieeffizienter Audioverstärker mit geringer Abwärme, zwei digitalen Audioeingängen über ein Dante-Audionetzwerk, zwei digitalen Audioausgängen an ein Dante-Audionetzwerk, vier analogen Mikrofon/Linepegel-Eingängen, zwei verstärkten Ausgängen und zwei Linepegel-Ausgängen
1. Kompakter Verstärker mit 100 W eff. Ausgangsleistung je Kanal, Dante-Audionetzwerk und ENERGY STAR®-Konformität
  1. Eingänge
    1. Zwei digitale Audioeingänge, über einen RJ-45-Stecker von einem Dante-Netzwerk
    2. Vier symmetrische oder unsymmetrische Mikrofon/Linepegel-Signale an zwei 6-poligen 3,5 mm-Schraubklemmleisten
  2. Ausgänge
    1. Zwei symmetrische oder unsymmetrische Linepegel-Signale an einer 6-poligen 3,5 mm-Schraubklemmleiste
      1. Ausgänge mit Dante-Durchgangsbuchse
    2. Vier digitale Audioausgänge, über einen RJ-45-Anschluss an ein Dante-Audionetzwerk gesendet
    3. Zwei Lautsprecherpegel-Signale an einer 4 poligen 3,5 mm-Schraubklemmleiste mit Schraubensicherung
      1. 100 W eff. Ausgangsleistung pro Kanal mit allen Kanälen an 4 Ω oder 8 Ω, gemessen bei 1 kHz mit 0,1 % Klirrfaktor
      2. Signal-Rausch-Verhältnis mindestens 90 dB, gemessen von 20 Hz bis 20 kHz, ungewichtet
      3. Minimale Lastimpedanz von 4 Ω
      4. Klirrfaktor von 0,1 %, gemessen bei 1 kHz, bei 8 Ω und 3 dB unter Begrenzung
  3. DSP-Prozessor
    1. Integrierter DSP-Audioprozessor
    2. Mit dem Matrix-Mischer können alle Eingänge und virtuellen Busse (Returns) zu einem oder allen Ausgängen geleitet werden
    3. 6 DSP-Eingangskanäle mit Filtern, Dynamik und Verstärkungsverarbeitung
    4. 6 DSP-Ausgangskanäle mit Verzögerung, Filtern, Dynamik und Dämpfung
  4. Konfigurationssoftware
    1. PC-basierte Konfigurationsanwendung
    2. Live-Modus zur Steuerung der Parameter in Echtzeit
    3. Emulationsmodus zur Offline-Konfiguration
    4. Ein einziges, scrollbares Fenster zur Anzeige von Ein- und Ausgängen, Audioverarbeitungs-Blöcken, Routing, Mischstellen sowie virtuellen Verbindungen
    5. Einrichtung und Konfiguration der digitalen Audioverarbeitungs-Tools
      1. Filter (Hochpass, Tiefpass, Tiefen, Höhen und parametrischer EQ)
      2. Dynamikverarbeitung (Kompressor/Limiter)
      3. Verzögerungsverarbeitung
      4. Ducking
    6. Ausschneiden-, Kopieren- und Einfügen-Funktion für die Verarbeitungsblöcke
    7. Matrix-Routing mit Verstärkungseinstellung pro Koppelpunkt zwischen Eingängen und Ausgängen
    8. Bibliothek mit vorgefertigten Prozessoreinstellungen
    9. Hauptgruppen
    10. Begrenzung der Einstellbereiche
    11. Presets zum Abruf aller Einstellungen
    12. Echtzeit-Messung der Pegel im Live-Modus in jedem Verarbeitungsblock für Eingangsverstärkung, Kompressor, Limiter und Ausgangsdämpfung
    13. Fenster mit Pegelskala (Meter Bridge) zur Echtzeit-Messung aller Eingangs- und Ausgangskanäle mit Übersteuerungsanzeige im Live-Modus
    14. Navigation der Konfigurationssoftware über die Tastatur
    15. Speichern von Dateien im Live- und Emulationsmodus
    16. Hochladen der Konfigurationsdatei im Live-Modus
    17. Konfiguration und Dateispeicherung von mehreren miteinander verbundenen oder vernetzten Prozessoren in einer einzigen Konfigurationssitzung
  5. Verstärker
    1. Klasse-D-Verstärkerdesign
    2. Class D Ripple Suppression-Technologie
    3. Lüfterlose Kühlung
    4. Automatischer Clip-Limiter
    5. Mehrere Schutzschaltungen werden bei Kurzschlüssen, Überhitzung oder Gleichstromfehlern sofort aktiviert
    6. Korrektur des Leistungsfaktors beseitigt Oberwellen auf der Netzzuleitung
  6. Dante-Audionetzwerk
    1. Empfängt Kanäle über ein Netzwerk mit Standard-Internetprotokollen
      1. Vier Dante-Kanäle werden mit dem DSP-Eingangsbereich verbunden
    2. Sendet Kanäle über ein Netzwerk mit Standard-Internetprotokollen
      1. Vier Dante-Kanäle werden mit dem DSP-Ausangsbereich verbunden
    3. Dante-Controller-Software zur Konfiguration von Audionetzwerken
    4. Netzwerk-Managementsoftware Dante Domain Manager für Netzwerksicherheit und zur logischen Segmentierung
    5. AES67-Standard für Interoperabilität mit anderen AES67-Geräten
    6. RJ-45-Anschluss zur Verbindung mit dem Dante-Audionetzwerk
    7. Synchronisation mit der Hauptuhr im Dante-Netzwerk
    8. Unkomprimiertes digitales Audio mit einer Abtastrate von 48 kHz und 24 Bit-Auflösung
  7. Stromversorgung
    1. 38,7 W Verbrauch bei normalem Betrieb (1/8 Leistung) mit allen Ausgangskanälen bei 4 Ω-Belastung
    2. 37 W Verbrauch bei normalem Betrieb (1/8 Leistung) mit allen Ausgangskanälen bei 8 Ω-Belastung
    3. 8 W Verbrauch im Ruhezustand
    4. Standby-Energiesparmodus
      1. Standby-Modus nach 25 min Inaktivität
      2. Verbraucht im Standby-Modus 4 W oder weniger
      3. Bei einem erneuten Signal in weniger als 100 ms betriebsbereit
      4. Abschaltbarer automatischer Standby-Timer
    5. ENERGY STAR-konform
    6. Internes Universalnetzteil mit IEC-Buchse und Unterstützung internationaler 100 240 V Wechselstrom-Standards
  8. Steuerung
    1. Anschluss zur Fernsteuerung des Standby-Modus an Schraubklemmleisten
    2. Support für bidirektionales RS 232 an Schraubklemmleisten
    3. Fernsteuerung über externes Steuerungssystem mit Befehlen über RS-232, Dante-Netzwerk oder USB
  9. Gerätevorderseite
    1. LED zur Anzeige der Betriebsspannung
    2. Grüne LED-Leuchten zur Anzeige der Signalpräsenz am Eingang
    3. Rote LED-Leuchten zur Warnung bei Übersteuerung und Anzeige der Aktivierung der Schutzschaltung
    4. Rote LED zur Anzeige einer überhöhten Gehäusetemperatur
  10. Geräterückseite
    1. RJ-45-Anschluss für digitale Dante-Audionetzwerkverbindung und bis zu vier eingehende digitale Audiokanäle
    2. Vier Mikrofon/Linepegel-Eingänge an zwei Schraubklemmleisten
    3. Zwei symmetrische oder unsymmetrische Linepegel-Ausgänge an einer Schraubklemmleiste
    4. Zwei Lautsprecherausgänge an einer Schraubklemmleiste mit Schraubensicherung
    5. Anschluss zur Fernsteuerung des Standby-Modus an einer Schraubklemmleisten
    6. Bidirektionaler RS-232-Anschluss an einer Schraubklemmleiste
    7. Grüne LED zur Anzeige des Synchronisationstatus mit der Hauptuhr im Dante-Netzwerk
  11. Allgemeines
    1. Rackmontierbares, 1 HE hohes Metallgehäuse mit halber Rackbreite
    2. Mit Hardware zur Rackmontage
    3. Betriebsbestimmungen
      1. CE, c-UL und UL
      2. UL 60065, IEC 60065 und BSEN 60065 für Sicherheit
      3. UL-eingetragen
      4. Konformität mit CE, C-Tick, EN 55103-1, EN 55103-2, FCC Klasse B, ICES und VCCI Klasse B
      5. ENERGY STAR, EU-Verhaltensregeln, RoHS und WEEE
    4. Drei Jahre Garantie auf Material und Verarbeitung
    5. Sieben Jahre Garantie auf Material und Verarbeitung des Netzteils
Empfohlenes Produkt: Extron NetPA U 1200 (Teilenummer 60-1767-01)

NetPA U 1002-70V

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support two digital audio inputs received from a Dante® audio network, two digital audio outputs to a Dante audio network, four analog mic/line inputs, two amplified outputs with 100 watts rms power output per channel, and two line level outputs.
1. Compact amplifier with 100 watts rms power output per channel, Dante audio networking, and ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support two digital audio inputs, received from a Dante audio network via an RJ-45 connector
    2. Shall support four, balanced or unbalanced mic/line signals on two 6-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced line level signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will provide Dante audio pass-through
    2. Shall support four digital audio outputs, transmitted to a Dante audio network via an RJ-45 connector
    3. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall provide 100 watts rms output power per channel with all channels driven into 70 volt systems measured at 1 kHz with 0.1% THD
      2. Shall provide a signal-to-noise ratio at least 90 dB measured from 20 Hz to 20 kHz, unweighted
      3. Shall support a minimum load impedance of 50 ohms
      4. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz, 3 dB below clipping
  3. DSP Engine Requirements
    1. Shall provide integrated audio DSP engine
    2. Shall provide a mix matrix such that all inputs and returns can be discretely routed to any or all of the outputs
    3. Shall provide 6 DSP input channels with filters, dynamics, and gain processing
    4. Shall provide 6 DSP output channels with delay, filters, dynamics, and attenuation processing
  4. Configuration Software Requirements
    1. Shall provide PC-based DSP Configurator Software allowing flexible control of the digital signal processor’s fixed architecture
    2. Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor
    3. Shall provide an Emulate mode for offline configuration
    4. Shall provide single, scrollable window for viewing of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing
    5. Shall provide setup and configuration of digital audio processing tools including, but not limited to: Filters (high pass, low pass, bass shelving, treble shelving, and parametric); Dynamics processing (Compressor, Limiter); Delay processing; and Ducking
    6. Shall provide cut, copy, paste editing between processing blocks
    7. Shall provide matrix routing with integrated mix point gain adjustment between inputs and outputs
    8. Shall provide a library of pre-designed processor settings for inputs and outputs with user-customizable parameters
    9. Shall provide Group Master controls for consolidation of individual gain or mute control members of the same type into one point of control
    10. Shall provide Soft Limits settings to define upper and lower control limits on Group Masters for use with external controls
    11. Shall provide Presets for recall of any processing block setting, level setting or audio routing; presets shall be saved for the entire system, or any selected partial group of inputs, outputs, mix points, and DSP blocks
    12. Shall provide real-time metering of levels within each Input Gain, Compressor, Limiter, and Output Attenuation processing block in Live mode
    13. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
    14. Shall provide keyboard-based navigation of configuration software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands
    15. Shall provide file saving in both Live and Emulate mode
    16. Shall provide configuration file upload in Live mode
    17. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration software session
  5. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  6. Dante Audio Networking Requirements
    1. Shall support receive channels over a local area network using standard Internet protocols
      1. Four Dante channels will be tied to the DSP input section
    2. Shall support transmit channels over a local area network using standard Internet protocols
      1. Four Dante channels tied to the DSP output section
    3. Shall support Dante Controller software for digital audio network configuration
    4. Shall support Dante Domain Manager network management software for network security and logical segmenting.
    5. Shall support the AES67 standard for interoperability with other devices that also support AES67
    6. Shall provide an RJ-45 connector to support Dante audio network connection
    7. Shall synchronize to the master clock on the Dante network
    8. Shall provide uncompressed digital audio at 48 kHz sampling rate with 24-bit resolution
  7. Power Requirements
    1. Shall draw 38 watts during typical (1/8 power) operation with all output channels driven
    2. Shall draw 8.3 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw 4 watts or less while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall provide a defeatable auto standby timer
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  8. Control Requirements
    1. Shall support remote standby control on 3.5 mm captive screw connectors
    2. Shall accept 3.5 mm captive screw connectors to support bidirectional RS-232
    3. Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232, Dante network connection, or USB
  9. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
      1. LED shall blink momentarily in the same color and pattern as the Link indicator LED on the rear panel when an “Identify Device” request is sent from Dante Controller software
    2. Shall provide green LEDs for input signal presence indication
    3. Shall provide red LEDs for indication of clip warning and protection circuit activation
    4. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
  10. Rear Panel Requirements
    1. Shall provide an RJ-45 connector to support Dante digital audio network connection and up to four incoming digital audio channels
    2. Shall provide four mic/line level inputs on two 6-pole, 3.5 mm captive screw connectors
    3. Shall provide two balanced or unbalanced line level outputs on one 6-pole, 3.5 mm captive screw connector
    4. Shall provide two speaker outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    5. Shall provide remote standby control port on 3.5 mm captive screw connectors
    6. Shall provide bidirectional RS-232 port that accepts a 3.5 mm captive screw connector
    7. Shall provide green LED for indication of synchronization to the master clock on the Dante network
      1. LED shall blink green when the unit generates the Dante network audio clock
      2. LED shall light solid green when the unit is locked to the Dante network audio clock
      3. LED shall remain unlit when the unit is not locked to the Dante network audio clock
  11. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall include rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      4. Shall meet EMI/EMC compliances under CE, C-tick, EN 55103-1, EN 55103-2, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    4. Shall provide three years parts and labor product warranty
    5. Shall provide seven years parts and labor power supply warranty
2. Approved device shall be the Extron NetPA U 1002-70V, part number 60-1767-02; no alternates or equals.

NetPA U 1002-70V

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support two digital audio inputs received from a Dante® audio network, two digital audio outputs to a Dante audio network, four analog mic/line inputs, two amplified outputs with 100 watts rms power output per channel, and two line level outputs.
1. Compact amplifier with 100 watts rms power output per channel, Dante audio networking, and ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support two digital audio inputs, received from a Dante audio network via an RJ-45 connector
    2. Shall support four, balanced or unbalanced mic/line signals on two 6-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced line level signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will provide Dante audio pass-through
    2. Shall support four digital audio outputs, transmitted to a Dante audio network via an RJ-45 connector
    3. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall provide 100 watts rms output power per channel with all channels driven into 70 volt systems measured at 1 kHz with 0.1% THD
      2. Shall provide a signal-to-noise ratio at least 90 dB measured from 20 Hz to 20 kHz, unweighted
      3. Shall support a minimum load impedance of 50 ohms
      4. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz, 3 dB below clipping
  3. DSP Engine Requirements
    1. Shall provide integrated audio DSP engine
    2. Shall provide a mix matrix such that all inputs and returns can be discretely routed to any or all of the outputs
    3. Shall provide 6 DSP input channels with filters, dynamics, and gain processing
    4. Shall provide 6 DSP output channels with delay, filters, dynamics, and attenuation processing
  4. Configuration Software Requirements
    1. Shall provide PC-based DSP Configurator Software allowing flexible control of the digital signal processor’s fixed architecture
    2. Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor
    3. Shall provide an Emulate mode for offline configuration
    4. Shall provide single, scrollable window for viewing of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing
    5. Shall provide setup and configuration of digital audio processing tools including, but not limited to: Filters (high pass, low pass, bass shelving, treble shelving, and parametric); Dynamics processing (Compressor, Limiter); Delay processing; and Ducking
    6. Shall provide cut, copy, paste editing between processing blocks
    7. Shall provide matrix routing with integrated mix point gain adjustment between inputs and outputs
    8. Shall provide a library of pre-designed processor settings for inputs and outputs with user-customizable parameters
    9. Shall provide Group Master controls for consolidation of individual gain or mute control members of the same type into one point of control
    10. Shall provide Soft Limits settings to define upper and lower control limits on Group Masters for use with external controls
    11. Shall provide Presets for recall of any processing block setting, level setting or audio routing; presets shall be saved for the entire system, or any selected partial group of inputs, outputs, mix points, and DSP blocks
    12. Shall provide real-time metering of levels within each Input Gain, Compressor, Limiter, and Output Attenuation processing block in Live mode
    13. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
    14. Shall provide keyboard-based navigation of configuration software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands
    15. Shall provide file saving in both Live and Emulate mode
    16. Shall provide configuration file upload in Live mode
    17. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration software session
  5. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  6. Dante Audio Networking Requirements
    1. Shall support receive channels over a local area network using standard Internet protocols
      1. Four Dante channels will be tied to the DSP input section
    2. Shall support transmit channels over a local area network using standard Internet protocols
      1. Four Dante channels tied to the DSP output section
    3. Shall support Dante Controller software for digital audio network configuration
    4. Shall support Dante Domain Manager network management software for network security and logical segmenting.
    5. Shall support the AES67 standard for interoperability with other devices that also support AES67
    6. Shall provide an RJ-45 connector to support Dante audio network connection
    7. Shall synchronize to the master clock on the Dante network
    8. Shall provide uncompressed digital audio at 48 kHz sampling rate with 24-bit resolution
  7. Power Requirements
    1. Shall draw 38 watts during typical (1/8 power) operation with all output channels driven
    2. Shall draw 8.3 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw 4 watts or less while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall provide a defeatable auto standby timer
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  8. Control Requirements
    1. Shall support remote standby control on 3.5 mm captive screw connectors
    2. Shall accept 3.5 mm captive screw connectors to support bidirectional RS-232
    3. Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232, Dante network connection, or USB
  9. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
      1. LED shall blink momentarily in the same color and pattern as the Link indicator LED on the rear panel when an “Identify Device” request is sent from Dante Controller software
    2. Shall provide green LEDs for input signal presence indication
    3. Shall provide red LEDs for indication of clip warning and protection circuit activation
    4. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
  10. Rear Panel Requirements
    1. Shall provide an RJ-45 connector to support Dante digital audio network connection and up to four incoming digital audio channels
    2. Shall provide four mic/line level inputs on two 6-pole, 3.5 mm captive screw connectors
    3. Shall provide two balanced or unbalanced line level outputs on one 6-pole, 3.5 mm captive screw connector
    4. Shall provide two speaker outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    5. Shall provide remote standby control port on 3.5 mm captive screw connectors
    6. Shall provide bidirectional RS-232 port that accepts a 3.5 mm captive screw connector
    7. Shall provide green LED for indication of synchronization to the master clock on the Dante network
      1. LED shall blink green when the unit generates the Dante network audio clock
      2. LED shall light solid green when the unit is locked to the Dante network audio clock
      3. LED shall remain unlit when the unit is not locked to the Dante network audio clock
  11. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall include rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      4. Shall meet EMI/EMC compliances under CE, C-tick, EN 55103-1, EN 55103-2, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    4. Shall provide three years parts and labor product warranty
    5. Shall provide seven years parts and labor power supply warranty
2. Approved device shall be the Extron NetPA U 1002-70V, part number 60-1767-02; no alternates or equals.

NetPA U 1002-100V

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support two digital audio inputs received from a Dante® audio network, two digital audio outputs to a Dante audio network, four analog mic/line inputs, two amplified outputs with 100 watts rms power output per channel, and two line level outputs.
1. Compact amplifier with 100 watts rms power output per channel, Dante audio networking, and ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support two digital audio inputs, received from a Dante audio network via an RJ-45 connector
    2. Shall support four, balanced or unbalanced mic/line signals on two 6-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced line level signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will provide Dante audio pass-through
    2. Shall support four digital audio outputs, transmitted to a Dante audio network via an RJ-45 connector
    3. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall provide 100 watts rms output power per channel with all channels driven into 100 volt systems measured at 1 kHz with 0.1% THD
      2. Shall provide a signal-to-noise ratio at least 90 dB measured from 20 Hz to 20 kHz, unweighted
      3. Shall support a minimum load impedance of 100 ohms
      4. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz, 3 dB below clipping
  3. DSP Engine Requirements
    1. Shall provide integrated audio DSP engine
    2. Shall provide a mix matrix such that all inputs and returns can be discretely routed to any or all of the outputs
    3. Shall provide 6 DSP input channels with filters, dynamics, and gain processing
    4. Shall provide 6 DSP output channels with delay, filters, dynamics, and attenuation processing
  4. Configuration Software Requirements
    1. Shall provide PC-based DSP Configurator Software allowing flexible control of the digital signal processor’s fixed architecture
    2. Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor
    3. Shall provide an Emulate mode for offline configuration
    4. Shall provide single, scrollable window for viewing of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing
    5. Shall provide setup and configuration of digital audio processing tools including, but not limited to: Filters (high pass, low pass, bass shelving, treble shelving, and parametric); Dynamics processing (Compressor, Limiter); Delay processing; and Ducking
    6. Shall provide cut, copy, paste editing between processing blocks
    7. Shall provide matrix routing with integrated mix point gain adjustment between inputs and outputs
    8. Shall provide a library of pre-designed processor settings for inputs and outputs with user-customizable parameters
    9. Shall provide Group Master controls for consolidation of individual gain or mute control members of the same type into one point of control
    10. Shall provide Soft Limits settings to define upper and lower control limits on Group Masters for use with external controls
    11. Shall provide Presets for recall of any processing block setting, level setting or audio routing; presets shall be saved for the entire system, or any selected partial group of inputs, outputs, mix points, and DSP blocks
    12. Shall provide real-time metering of levels within each Input Gain, Compressor, Limiter, and Output Attenuation processing block in Live mode
    13. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
    14. Shall provide keyboard-based navigation of configuration software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands
    15. Shall provide file saving in both Live and Emulate mode
    16. Shall provide configuration file upload in Live mode
    17. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration software session
  5. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  6. Dante Audio Networking Requirements
    1. Shall support receive channels over a local area network using standard Internet protocols
      1. Four Dante channels will be tied to the DSP input section
    2. Shall support transmit channels over a local area network using standard Internet protocols
      1. Four Dante channels tied to the DSP output section
    3. Shall support Dante Controller software for digital audio network configuration
    4. Shall support Dante Domain Manager network management software for network security and logical segmenting.
    5. Shall support the AES67 standard for interoperability with other devices that also support AES67
    6. Shall provide an RJ-45 connector to support Dante audio network connection
    7. Shall synchronize to the master clock on the Dante network
    8. Shall provide uncompressed digital audio at 48 kHz sampling rate with 24-bit resolution
  7. Power Requirements
    1. Shall draw 38.7 watts during typical (1/8 power) operation with all output channels driven
    2. Shall draw 8.1 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw 4 watts or less while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall provide a defeatable auto standby timer
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  8. Control Requirements
    1. Shall support remote standby control on 3.5 mm captive screw connectors
    2. Shall accept 3.5 mm captive screw connectors to support bidirectional RS-232
    3. Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232, Dante network connection, or USB
  9. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
      1. LED shall blink momentarily in the same color and pattern as the Link indicator LED on the rear panel when an “Identify Device” request is sent from Dante Controller software
    2. Shall provide green LEDs for input signal presence indication
    3. Shall provide red LEDs for indication of clip warning and protection circuit activation
    4. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
  10. Rear Panel Requirements
    1. Shall provide an RJ-45 connector to support Dante digital audio network connection and up to four incoming digital audio channels
    2. Shall provide four mic/line level inputs on two 6-pole, 3.5 mm captive screw connectors
    3. Shall provide two balanced or unbalanced line level outputs on one 6-pole, 3.5 mm captive screw connector
    4. Shall provide two speaker outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    5. Shall provide remote standby control port on 3.5 mm captive screw connectors
    6. Shall provide bidirectional RS-232 port that accepts a 3.5 mm captive screw connector
    7. Shall provide green LED for indication of synchronization to the master clock on the Dante network
      1. LED shall blink green when the unit generates the Dante network audio clock
      2. LED shall light solid green when the unit is locked to the Dante network audio clock
      3. LED shall remain unlit when the unit is not locked to the Dante network audio clock
  11. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall include rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      4. Shall meet EMI/EMC compliances under CE, C-tick, EN 55103-1, EN 55103-2, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    4. Shall provide three years parts and labor product warranty
    5. Shall provide seven years parts and labor power supply warranty
2. Approved device shall be the Extron NetPA U 1002-100V, part number 60-1767-12; no alternates or equals.

NetPA U 1002-100V

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support two digital audio inputs received from a Dante® audio network, two digital audio outputs to a Dante audio network, four analog mic/line inputs, two amplified outputs with 100 watts rms power output per channel, and two line level outputs.
1. Compact amplifier with 100 watts rms power output per channel, Dante audio networking, and ENERGY STAR® qualification
  1. Input Requirements
    1. Shall support two digital audio inputs, received from a Dante audio network via an RJ-45 connector
    2. Shall support four, balanced or unbalanced mic/line signals on two 6-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced line level signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will provide Dante audio pass-through
    2. Shall support four digital audio outputs, transmitted to a Dante audio network via an RJ-45 connector
    3. Shall support two speaker level signals on one 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall provide 100 watts rms output power per channel with all channels driven into 100 volt systems measured at 1 kHz with 0.1% THD
      2. Shall provide a signal-to-noise ratio at least 90 dB measured from 20 Hz to 20 kHz, unweighted
      3. Shall support a minimum load impedance of 100 ohms
      4. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz, 3 dB below clipping
  3. DSP Engine Requirements
    1. Shall provide integrated audio DSP engine
    2. Shall provide a mix matrix such that all inputs and returns can be discretely routed to any or all of the outputs
    3. Shall provide 6 DSP input channels with filters, dynamics, and gain processing
    4. Shall provide 6 DSP output channels with delay, filters, dynamics, and attenuation processing
  4. Configuration Software Requirements
    1. Shall provide PC-based DSP Configurator Software allowing flexible control of the digital signal processor’s fixed architecture
    2. Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor
    3. Shall provide an Emulate mode for offline configuration
    4. Shall provide single, scrollable window for viewing of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing
    5. Shall provide setup and configuration of digital audio processing tools including, but not limited to: Filters (high pass, low pass, bass shelving, treble shelving, and parametric); Dynamics processing (Compressor, Limiter); Delay processing; and Ducking
    6. Shall provide cut, copy, paste editing between processing blocks
    7. Shall provide matrix routing with integrated mix point gain adjustment between inputs and outputs
    8. Shall provide a library of pre-designed processor settings for inputs and outputs with user-customizable parameters
    9. Shall provide Group Master controls for consolidation of individual gain or mute control members of the same type into one point of control
    10. Shall provide Soft Limits settings to define upper and lower control limits on Group Masters for use with external controls
    11. Shall provide Presets for recall of any processing block setting, level setting or audio routing; presets shall be saved for the entire system, or any selected partial group of inputs, outputs, mix points, and DSP blocks
    12. Shall provide real-time metering of levels within each Input Gain, Compressor, Limiter, and Output Attenuation processing block in Live mode
    13. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
    14. Shall provide keyboard-based navigation of configuration software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands
    15. Shall provide file saving in both Live and Emulate mode
    16. Shall provide configuration file upload in Live mode
    17. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration software session
  5. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  6. Dante Audio Networking Requirements
    1. Shall support receive channels over a local area network using standard Internet protocols
      1. Four Dante channels will be tied to the DSP input section
    2. Shall support transmit channels over a local area network using standard Internet protocols
      1. Four Dante channels tied to the DSP output section
    3. Shall support Dante Controller software for digital audio network configuration
    4. Shall support Dante Domain Manager network management software for network security and logical segmenting.
    5. Shall support the AES67 standard for interoperability with other devices that also support AES67
    6. Shall provide an RJ-45 connector to support Dante audio network connection
    7. Shall synchronize to the master clock on the Dante network
    8. Shall provide uncompressed digital audio at 48 kHz sampling rate with 24-bit resolution
  7. Power Requirements
    1. Shall draw 38.7 watts during typical (1/8 power) operation with all output channels driven
    2. Shall draw 8.1 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw 4 watts or less while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall provide a defeatable auto standby timer
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  8. Control Requirements
    1. Shall support remote standby control on 3.5 mm captive screw connectors
    2. Shall accept 3.5 mm captive screw connectors to support bidirectional RS-232
    3. Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232, Dante network connection, or USB
  9. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
      1. LED shall blink momentarily in the same color and pattern as the Link indicator LED on the rear panel when an “Identify Device” request is sent from Dante Controller software
    2. Shall provide green LEDs for input signal presence indication
    3. Shall provide red LEDs for indication of clip warning and protection circuit activation
    4. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
  10. Rear Panel Requirements
    1. Shall provide an RJ-45 connector to support Dante digital audio network connection and up to four incoming digital audio channels
    2. Shall provide four mic/line level inputs on two 6-pole, 3.5 mm captive screw connectors
    3. Shall provide two balanced or unbalanced line level outputs on one 6-pole, 3.5 mm captive screw connector
    4. Shall provide two speaker outputs on one 4-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    5. Shall provide remote standby control port on 3.5 mm captive screw connectors
    6. Shall provide bidirectional RS-232 port that accepts a 3.5 mm captive screw connector
    7. Shall provide green LED for indication of synchronization to the master clock on the Dante network
      1. LED shall blink green when the unit generates the Dante network audio clock
      2. LED shall light solid green when the unit is locked to the Dante network audio clock
      3. LED shall remain unlit when the unit is not locked to the Dante network audio clock
  11. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall include rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      4. Shall meet EMI/EMC compliances under CE, C-tick, EN 55103-1, EN 55103-2, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    4. Shall provide three years parts and labor product warranty
    5. Shall provide seven years parts and labor power supply warranty
2. Approved device shall be the Extron NetPA U 1002-100V, part number 60-1767-12; no alternates or equals.

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

NetPA U 1002 -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.