Produkte - Startseite
Verstärker
Verstärker
Netzwerk-Verstärker
XPA U 2004 FX
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 1004C XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 758

Drucken

Neu Pro

XPA U 2004 FX

Audioverstärker mit vier Kanälen und konfigurierbarem Ausgang
200 W pro Kanal

Hauptmerkmale

Vier 200 W-Kanäle mit 8 Ω, 4 Ω, 70 V oder 100 V
Konfigurierbarer Ausgangsmodus pro Kanal
Flexible Stromzuordnung für entsprechende Systemanforderungen
Automatischer Standby-Modus spart Energie
InstaWake+™ fährt in weniger als 5 ms aus dem Standby-Modus hoch
Wählbarer Hochpassfilter für die 70 V- und 100 V-Kanalmodi
Alle Merkmale

XPA U 2004 FX with Rear Rack Ears Attached

XPA U 2004 FX with Rear Rack Ear Maximum Depth

Previous Next

Bildergalerie

Interaktive Übersicht

Empfohlene Videos

Auswahlhilfe Verstärker

Dieses neue Tool erlaubt Ihnen jetzt, Verstärkermodelle nach Merkmalen zu suchen

Ausschreibungstexte

Überblick
Video
Beschreibung
Spezifikationen
Anwendungsbeispiel
Vorder- und Rückseite
Downloads

Überblick

Der Extron XPA U 2004 FX ist ein Audio-Hochleistungsverstärker mit vier Kanälen, der gleichzeitig 200 W mit 8 Ω, 4 Ω, 70 V oder 100 V für Systeme mit mehreren Bereichen liefern kann. Drehschalter auf der Rückseite des Verstärkers ermöglichen die schnelle, einfache und unabhängige Auswahl eines Ausgangsmodus pro Kanal für jede Zone. Dieser hocheffiziente Klasse-D-Verstärker nutzt die InstaWake+™-Technologie, mit der er in weniger als 5 Millisekunden aus dem Standby wieder vollständig hochfährt. Für eine maximale Flexibilität wird die Gesamtleistung von zwei benachbarten 200 W-Kanäle miteinander geteilt, um bis zu 400 W pro Kanal gemäß den Systemanforderungen zu liefern. Für das lüftergekühlte Gehäuse werden keine leeren Rackplätze für die Belüftung nebeneinander benötigt und es wird mit Hardware zur Rackmontage vorne und hinten am Gerät geliefert.

Video

Beschreibung

Spezifikationen

Anwendungsbeispiel

Vorder- und Rückseite

Downloads

Zuletzt angesehene Produkte

XPA U 2004 FX

Ausschreibungstexte

Wählen Sie eine Teilenummer:

Select a Part Number:

Text kopieren Kopiert! Ein Fehler ist aufgetreten. Versuchen Sie es später noch einmal.

XPA U 2004 FX

Provide an energy efficient audio amplifier with low thermal dissipation that shall support four analog inputs and four amplified outputs with 200 watts rms per channel into low or high impedance systems.
1. Audio power amplifier with 200 watts rms power output per channel and power sharing between adjacent odd/even channel pairs
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on two 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support four speaker level signals on four 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 200 watts rms per channel with all channels driven
    3. Shall provide 400 watts rms per channel with one channel driven per pair
    4. Shall support rear panel selection of individual channel output modes between 8 ohms, 4 ohms, or 70 volt or 100 volt operation
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    3. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    4. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 183.8 watts during typical (1/8 power) operation with all output channels equally driven with 4 ohm loads
    2. Shall draw 157.2 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 147.9 watts during typical (1/8 power) operation with all output channels driven in 70 volt mode
    4. Shall draw 139.8 watts during typical (1/8 power) operation with all output channels driven in 100 volt mode
    5. Shall draw 28.0 watts during quiescent operation
    6. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 2 watts while in standby mode
      3. Shall return to full power status in less than 5 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    7. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on a 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on four 2-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide one output mode select rotary switch per channel that selects between 4 ohm, 8 ohm, 70 volt, 70 volt (HPF OFF), 100 volt, and 100 volt (HPF OFF)
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall include rear rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet compliances under CE, CEC, CISPR 22 Class B, C-tick, c-UL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, VCCI Class B, UL 62368-1, IEC 62368-1, and EN 62368-1 for AV equipment
      2. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    4. Shall provide three year parts and labor product warranty
    5. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 2004 FX, part number 60-2026-01; no alternates or equals.

XPA U 2004 FX

Provide an energy efficient audio amplifier with low thermal dissipation that shall support four analog inputs and four amplified outputs with 200 watts rms per channel into low or high impedance systems.
1. Audio power amplifier with 200 watts rms power output per channel and power sharing between adjacent odd/even channel pairs
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on two 5-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support four speaker level signals on four 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 200 watts rms per channel with all channels driven
    3. Shall provide 400 watts rms per channel with one channel driven per pair
    4. Shall support rear panel selection of individual channel output modes between 8 ohms, 4 ohms, or 70 volt or 100 volt operation
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    3. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    4. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 183.8 watts during typical (1/8 power) operation with all output channels equally driven with 4 ohm loads
    2. Shall draw 157.2 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 147.9 watts during typical (1/8 power) operation with all output channels driven in 70 volt mode
    4. Shall draw 139.8 watts during typical (1/8 power) operation with all output channels driven in 100 volt mode
    5. Shall draw 28.0 watts during quiescent operation
    6. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 2 watts while in standby mode
      3. Shall return to full power status in less than 5 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    7. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on a 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on two 5-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on four 2-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide one output mode select rotary switch per channel that selects between 4 ohm, 8 ohm, 70 volt, 70 volt (HPF OFF), 100 volt, and 100 volt (HPF OFF)
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall include rear rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet compliances under CE, CEC, CISPR 22 Class B, C-tick, c-UL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, VCCI Class B, UL 62368-1, IEC 62368-1, and EN 62368-1 for AV equipment
      2. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    4. Shall provide three year parts and labor product warranty
    5. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 2004 FX, part number 60-2026-01; no alternates or equals.

Zum Einkaufswagen hinzufügen

Order Message Number

Teilenummer

Hinweis: Extron-Produkte mit einer Universal-Netzsteckdose können mit vielen verschiedenen Netzsteckern genutzt werden. Bevor Sie diese verwenden, überprüfen Sie bitte, ob das Gerät alle erforderlichen Bestimmungen, Sicherheitsrichtlinien, elektrische Codes und Standards Ihres Landes erfüllt.

Anzahl

Aktuelle Summe

Einkaufswagen ansehen

XPA U 2004 FX -

Produktdetails

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.